278,254 Pages

.30 Remington
Type Rifle
Place of origin USA
Production history
Designer Remington Arms
Designed 1906
Manufacturer Remington Arms
Produced 1906-1980s
Case type Rimless
Bullet diameter .308 in (7.8 mm)
Base diameter .421 in (10.7 mm)
Rim diameter .422 in (10.7 mm)
Rim thickness .045 in (1.1 mm)
Case length 2.06 in (52 mm)
Overall length 2.525 in (64.1 mm)
Maximum CUP 38000 CUP
Ballistic performance
Bullet weight/type Velocity Energy
150 gr (10 g) Core-Lokt Round Nose 2,123 ft/s (647 m/s) 1,500 ft·lbf (2,000 J)
150 gr (10 g) Core-Lokt Round Nose 2,364 ft/s (721 m/s) 1,859 ft·lbf (2,520 J)
170 gr (11 g) Core-Lokt HP RN 1,893 ft/s (577 m/s) 1,350 ft·lbf (1,830 J)
170 gr (11 g) Core-Lokt HP RN 2,114 ft/s (644 m/s) 1,682 ft·lbf (2,280 J)
Test barrel length: 22"
Source(s): http://www.chuckhawks.com/30_Rem.htm

The .30 Remington cartridge was created in 1906 by Remington Arms. It was Remington's rimless answer to the popular .30-30 Winchester cartridge. Factory ammunition was produced up until the late 1980s, but now it is a prospect for handloaders. Load data for the .30-30 Winchester can be used safely for the .30 Remington.

Background[edit | edit source]

Although the cartridge has dwindled into obscurity to hunters, it lives on by being the parent case of the 10mm Auto[1][2] and the 6.8 mm Remington SPC cartridge. Unlike the .30-30, the .30 Remington can utilize standard pointed bullets rather than round nosed ones when used in rifles with box magazines (Remington Model 8) and ones with special tubular magazines (Remington Model 14). This gives it a possible advantage over the .30-30 cartridge which is most often chambered in lever-action rifles with standard tubular magazines (in which using a conventional pointed bullet could lead to cartridges being ignited by in the magazine tube by recoil into a primer).

While the .30 Remington is ballistically equivalent to the .30-30 Winchester cartridge, the cartridges are dimensionally different and are not interchangeable.

See also[edit | edit source]

References[edit | edit source]

  1. Donnelly, John J. (1987). The Handloader's Manual of Cartridge Conversions. Stoeger Publishing. p. 941. ISBN 978-0-88317-269-8. 
  2. Howell, Ken (1995). Designing and Forming Custom Cartridges. Precision Shooting. p. 546. ISBN 0-9643623-0-9. 

This page uses Creative Commons Licensed content from Wikipedia (view authors).
Community content is available under CC-BY-SA unless otherwise noted.