55gr 5.56 NATO vs 500gr .458 SOCOM
|Place of origin||United States|
|Designer||Teppo Jutsu LLC|
|Bullet diameter||11.63 mm (0.458 in)|
|Neck diameter||12.32 mm (0.485 in)|
|Shoulder diameter||13.49 mm (0.531 in)|
|Base diameter||13.74 mm (0.541 in)|
|Rim diameter||12.01 mm (0.473 in)|
|Rim thickness||1.04 mm (0.041 in)|
|Case length||40.00 mm (1.575 in)|
|Overall length||57.40 mm (2.260 in)|
|Rifling twist||1 in 14" (most common) or 18"|
|Primer type||Large Pistol|
The .458 SOCOM is a relatively large round designed for a specialized upper receiver that can be mounted on any AR-15 pattern lower receiver. The 300-grain (19 g) round offers a muzzle velocity of 1,900 ft/s (580 m/s) and 2,405 ft·lbf (3,261 J).
History[edit | edit source]
Inspired by the lack of power offered by the 5.56 NATO cartridge used in the M4 carbine and the M16 rifle, the .458 SOCOM came about from informal discussion of members of the special operations community, specifically Task Force Ranger's experience that multiple shots were required to neutralize members of the opposing force in Mogadishu during Operation Gothic Serpent. Marty ter Weeme designed the cartridge in 2000 and Tony Rumore of Tromix was contracted to build the first .458 SOCOM rifle in February 2001. Tony Rumore fired the very first round of .458 SOCOM ammunition in the Tromix shop located in Broken Arrow, Oklahoma on February 16, 2001, at 8:30pm.
The project sponsor set forth a number of specific requirements that led to the ultimate design as it stands right now[when?]: The cartridge had to fit in the M-4 carbine platform and magazines and be capable of firing heavy-for-caliber projectiles at subsonic velocity using suppressors. During the developments phase, various other cartridges were considered and proposed to the project sponsor, but rejected as not meeting all the requirements. The cartridges considered were 7.62×39mm M43, 9x39mm Grom, .45 Professional (which has since become the .450 Bushmaster), and .50 Action Express. At the time, the .499 LWR cartridge was still in development phase and had not been chambered commercially.
The .45 Professional was ruled out because in an interview with industry press, the developer of said cartridge stated that steel proprietary to General Motors was used in the bolts and extensions to withstand the high operating pressures. The .50 AE and .499 LWR were ruled out because in 2000 only two bullets were offered in .501 diameter, both developed as pistol bullets for the .50 AE and not heavy enough for the subsonic suppressed role. Research had indicated that a short belted cartridge called the .458 × 1.5" Barnes had been adopted for use in suppressed bolt action rifles for use in SE Asia during the Vietnam War. It was shown as effective in terms of ballistics, firing a 500 grain bullet subsonically, but not ideally suited for its role due to the size and weight of the platform. Combined with the wide selection of bullets available in .458 diameter, this cemented the choice of caliber.
The cartridge case design was finalized based on discussions with Tony Rumore at Tromix suggesting a lengthened .50 AE case would work well in the magazines as well as be the largest diameter case to be able to feed through the barrel extension. The rim size was chosen for compatibility with other platforms, primarily bolt action rifles, as the .473" diameter rim is arguably the most common rim size globally (all bolt actions chambered in 7.92×57mm Mauser, .30-06 Springfield or .308 Winchester share this rim size). The case length was chosen to be compatible with the Barnes 300-grain X Spitzer bullet. In 2009, Barnes developed a new bullet specifically for use in the .458 SOCOM, the 300 grain Tipped Triple Shock X, also known as the TTSX or TAC-X.
As noted above, the cartridge was designed to be 100% compatible with the M4 platform. This included the buffer, buffer spring, GI magazines, many aftermarket .223/5.56 magazines, and magazine well. In .223/5.56 caliber, cartridges stack in a staggered (double stack) fashion. However, with the much larger .458 SOCOM, rounds "single stack" without any modification to the standard GI magazine feed lips or follower, making it the most versatile and cost effective big bore offering in an AR-15 platform.
Today, .458 SOCOM rifles and complete upper halves are available from Rock River Arms and Wilson Combat. Barrels and bolts can be purchased from Southern Ballistic Research. Brass for hand loading is exclusively produced by Starline. Loaded ammunition is also manufactured by Southern Ballistic Research as well as a few small boutique shops.
See also[edit | edit source]
References[edit | edit source]
[edit | edit source]
The website dedicated to the .458SOCOM, where load data and other info also available.
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|