A Canadian towed anti-aircraft mounting featuring three Polsten cannons.
|Place of origin||Poland|
|In service||1944 - 1950s|
|Used by||UK, Commonwealth|
|Unit cost||£60 - £70|
|Weight||126 lb (57 kg)|
|Length||7 ft (2.1 m)|
|Barrel length||4 ft 9 in (1.45 m) (barrel)|
|Calibre||20 mm (0.78 in)|
|Rate of fire||450 rpm|
|Muzzle velocity||2,725 ft/s (830 m/s)|
|Effective range||1,000 m (3,281 ft)|
|Maximum range||2,000 m (6,562 ft)|
|Feed system||60 round drum magazine or 30 round box magazine|
The Polsten was a low cost Polish development of the 20 mm Oerlikon gun. The Polsten was designed to be simpler and much cheaper to build than the Oerlikon without reducing effectiveness.
Development[edit | edit source]
When Nazi Germany invaded Poland in 1939, the Polish design team escaped to England and resumed work together with Czech and British designers. The need for the Polsten was apparently mooted in June 1941. It went into service in March 1944 alongside the Oerlikon. Both the Oerlikon and the Polsten used similar 60 round drum magazines, however, the Polsten could use a simpler box magazine with 30 rounds. It remained in service into the 1950s.
When compared to the Oerlikon cannon which was made out of 250 parts, the Polsten was made out of 119 parts, without sacrificing the effectiveness or the reliability of the cannon. Simplification of the design of the Polsten cannon made its production much cheaper. The cost of one Oerlikon cannon was about £350, while the cost of the Polsten was between £60 and £70.
The Polsten was used as a substitute for the Oerlikon in the same roles, one of which was as an airborne unit anti-aircraft gun. It was used on a wheeled mounting that could be towed behind a jeep. Various double, triple and quadruple mounts were developed. John Inglis Limited of Toronto, Ontario in Canada produced many thousands of guns and some 500 quadruple mountings that saw limited service at the end of the war. These multiple mounts were both trailered and truck mounted.
The Polsten gun was used for armoured vehicles equipped with anti-aircraft guns based on the Cromwell/Centaur tank.
The Polsten was also mounted on early models of the Centurion tank not coaxially with the main gun but in an independent mount on the left hand side of the turret.
The origin of the name is not entirely clear. Some sources suggest Poland and the "Sten Company" to give Pol-sten, though the Sten gun was not made by a Sten Company. Official (United Kingdom) sources indicate the name to have been a compound based on Poland and the Royal Small Arms Factory Enfield in the same manner as the Bren gun (Brno + Enfield) or Sten (Shephard, Turpin + Enfield); also to reflect the gun design being mostly Polish (and the magazine mostly Czech) and the 8 Polish engineers in the design department. The "Sten" ending may also have linked in with the idea of the gun as a cheaper and quicker to produce weapon just like that gun was.
See also[edit | edit source]
References[edit | edit source]
- Postan, M. M., Hay, D. and Scott J.D. (1964). Design and Development of Weapons: Studies in Government and Industrial Organisation (History of the Second World War, United Kingdom Civil Series) London: HMSO & Longmans, Green & Co.
- Anti-Aircraft: Polsten 20mm Quad
[edit | edit source]
|Wikimedia Commons has media related to 20 mm Polsten.|
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|