Lateral view of a steel-cased 7.62×39mm FMJ cartridge.
|Place of origin||Soviet Union|
|Used by||Soviet Union, former Warsaw Pact, People's Republic of China, Cambodia, North Korea, Vietnam, Finland, Venezuela, many others|
|Case type||Rimless, bottleneck|
|Bullet diameter||7.92 mm (0.312 in)|
|Neck diameter||8.60 mm (0.339 in)|
|Shoulder diameter||10.07 mm (0.396 in)|
|Base diameter||11.35 mm (0.447 in)|
|Rim diameter||11.35 mm (0.447 in)|
|Rim thickness||1.50 mm (0.059 in)|
|Case length||38.70 mm (1.524 in)|
|Overall length||56.00 mm (2.205 in)|
|Case capacity||2.31 cm3 (35.6 gr H2O)|
|Rifling twist||240 mm (1 in 9.45 in)|
|Primer type||Boxer Large Rifle|
|Maximum pressure (C.I.P.)||355.0 MPa (51,490 psi)|
|Maximum pressure (SAAMI)||310.3 MPa (45,010 psi)|
|Filling||SSNF 50 powder|
|Filling weight||16.05 - 16.3 gr|
Test barrel length: 415 mm|
Source(s): Wolf Ammo Sellier & Bellot  RBCD 
The 7.62×39mm round is a rifle cartridge of Soviet origin that was designed during World War II. It was first used in the RPD machine gun. Due to the worldwide proliferation of the SKS and AK-47 pattern rifles, the cartridge is utilized by both militaries and civilians alike. 7.62×39mm ammunition is purportedly tested to function well in temperatures ranging from −50 °C (−58 °F) to 50 °C (122 °F) cementing its usefulness in extremely cold polar or hot desert conditions.
Shortly after the war, the world's most recognized military pattern rifle was designed for this cartridge: the AK-47. The cartridge remained the Soviet standard until the 1970s, and is still one of the most common intermediate rifle cartridges used around the world. It was replaced in Russian service by the 5.45×39mm cartridge, which is used by the current issue AK-74 and variants.
History[edit | edit source]
On July 15, 1943, the People's Commissariat for Armaments (Техсовета Наркомата Вооружения) met to discuss the introduction of a Soviet intermediate cartridge after a German Mkb 42(H) had been captured and an M1 carbine exemplar had been made available to the Soviets by the US. The Soviet planners also decided at this meeting that their new cartridge be used in a whole range of infantry weapons, including a semi-automatic carbine, a selective fire (assault) rifle, and a light machine gun. The job of designing the Soviet intermediate cartridge was assigned to a committee led by chief designer NM Elizarov (Н.М. Елизаров), assisted by PV Ryazanov (П.В. Рязанов), BV Semin (Б.В. Семин) and IT Melnikov (И.Т. Мельников). Elizarov collaborated closely with some leading weapons designers, including Fedorov, Tokarev, Simonov, and Shpagin. About 314 cartridge designs were considered theoretically, before narrowing the selection down to 8 models that were physically constructed and tested. Most of the development work on the new cartridge took place at OKB-44, which was soon thereafter renamed as NII-44, and which in 1949 was merged with NII-61, itself merged with TsNIITochmash in 1966.
A first variant of the new cartridge was officially adopted for service after completing range trials in December 1943; it was given the GAU index 57-N-231. This cartridge actually had a case length of 41 mm, so it is sometimes referred to as the 7.62x41. The bullet it contained was 22.8 mm long and had a core made entirely of lead. This bullet has a somewhat stubbier appearance than later 7.62x39 bullets, with its maximal radius being attained after only 13.01 mm from its tip, and it was lacking a boat tail. After some further refinements, a pilot production series of this cartridge began in March 1944.
After more detailed testing results became available, starting in 1944 the cartridge was tweaked in order to improve its accuracy and penetration. Initially, the boat tail had been omitted because the Soviet designers had assumed (incorrectly) that it would only make a difference at long ranges, when the bullet became subsonic, and the accuracy of the intermediate cartridge at these ranges was considered inconsequential. However, further testing showed that the boat tail improved accuracy even at shorter ranges, where the bullet was still supersonic. In order to maintain the overall mass of the bullet, after adding the boat tail, the ogival head section of the bullet was lengthened as well, making the bullet more streamlined overall. The maximum radius was now attained at some 15.95 mm from the tip and the overall length of the bullet increased to 26.8 mm. In order to preserve the total length of the cartridge, the case sleeve was shortened to 38.7 mm (and by rounding it is customarily referred to as 7.62x39.) Additionally, the new bullet had a core made of low-carbon steel wrapped in lead. The use of low-carbon (mild) steel was guided mostly by the desire to reuse some industrial equipment that was manufacturing the 7.62×25mm Tokarev cartridge rather than by bullet fragmentation considerations. This bullet was given the acronym "7.62 PS" (76.2 ПС), where "S" initially stood for "surrogate" (суррогатированная), but later the letter was taken to refer to the steel component of the core, which accounted for about 50% of the core volume. The 7.62x39 cartridge equipped with the PS bullet finally overcame all objections of the GAU in mid-1947, when it was ordered into series production, and given the index 57-N-231S.
The design that was ultimately selected by the Soviets has more dimensional similarities to the GECO cartridge used in the Vollmer M35 than with the Polte round used by the later German Sturmgewehr. Some authors, including C. J. Chivers, have speculated that the Soviets may have had access to the works of GECO and Vollmer during 1940, when Hitler allowed a large number of Soviet engineers to tour various German armament factories. Anthony Williams however argues that the Soviet M43 round was sufficiently different to dismiss the idea that it was a copy of any German round in existence at the time.
The 57-N-231S cartridge used a "bimetallic" (steel and copper) case. In the early 1960s, a "lacquered" steel case was introduced, and the new cartridge was initially given the designation 57-N-231SL. In an effort to simplify terminology, sometime thereafter the 57-N-231 designation was recycled to denote all steel-core 7.62x39 Soviet ammunition, irrespective of case build.
In the mid 1950s, Elizarov's team, now working at NII-61, developed a special subsonic bullet for the 7.62x39 cartridge. It was adopted for service in 1962, and given the army designation "7.62 US" (US stood for уменьшенной скоростью, meaning reduced speed) and the GRAU index 57-N-231U. The subsonic bullet was considerably longer (33.62 mm) and heavier (12.5 g) than the PS bullet, and also had a different, non-layered core structure. The core of its head section was entirely made of tool steel, followed by another section entirely made of lead. The subsonic bullet also has a larger maximum diameter of 7.94 mm compared to all other 7.62x29 bullets that peak at 7.92 mm diameter; the larger diameter of the lead-core section was intended to provide a tighter fit to the barrel by better engaging the rifling grooves. The 7.62 subsonic ammo was intended to be fired from AK47-type rifles equipped with the PBS-1 silencer, and developed a muzzle velocity of about 285–300 m/s. For recognition, this ammo typically has the bullet tips pained black with green band underneath.
After 1989, the regular (PS) Russian bullets started to be manufactured with a steel core with a higher carbon concentration and subjected to heat treatment. This change improved their penetration by 1.5-2 times. It is not possible to externally distinguish these bullets from the earlier, softer PS ones except by year of fabrication. At about the same time, tool steel was adopted for a normal velocity 7.62x39 bullet. Called BP, this bulled was developed in the 1980s and 1990s. It was officially adopted for Russian service in 2002 under the service name "7.62 BP", and with the GRAU designation 7N23. The BP bullet is claimed to achieve over three times the penetration of the PS bullet; it can defeat the Russian bullet-proof vest with designation 6B5 at distances below 250 meters. The BP cartridge has the tip of its bullet painted black. The BP bullet itself is slightly longer (27.4 mm) compared to the PS bullet, but has the same mass of 7.9 grams.
At the same 1943 meeting that decided the development new cartridge, the Soviet planners decided that a whole range of new small arms should use it, including a semi-automatic carbine, a fully automatic rifle, and a light machine gun. Design contests for these new weapons began in earnest in 1944.
Variants[edit | edit source]
M43[edit | edit source]
The original Soviet M43 bullets are 123 grain boat-tail bullets with a copper-plated steel jacket, a large steel core, and some lead between the core and the jacket. The cartridge itself consisted of a Berdan-primed, highly tapered (usually steel) case which seats the bullet and contains the powder charge. The taper makes it very easy to feed and extract the round, since there is little contact with the chamber walls until the round is fully seated. This taper is what causes the AK-47 to have distinctively curved magazines (helping to distinguish AK-47s from AK-74s, which feed from a much straighter magazine). While the bullet design has gone through a few redesigns, the cartridge itself remains largely unchanged.
According to Martin Fackler, although the new cartridge represented a great leap forward from previous designs, compared to later designs like 5.56 mm and 5.45 mm bullets, it has little wounding capacity. The complete solidity of the M43 projectile causes its only drawback—it is very stable, even while traversing tissue. It begins to yaw only after traversing nearly 26 cm (10 in) of tissue. This greatly reduces the wounding effectiveness of the projectile against humans. These wounds were comparable to that of a small handgun round using non-expanding bullets. Unless the round struck something vital, the wound was usually non-fatal, small and quick to heal.
M67[edit | edit source]
In the 1960s Yugoslavia experimented with new bullet designs to produce a round with a superior wounding profile, speed, and accuracy to the M43. The M67 projectile is shorter and flatter-based than the M43. This is mainly due to the deletion of the mild steel insert. This has the side effect of shifting the center of gravity rearward in comparison to the M43. This allows the projectile to destabilize nearly 17 cm (6.7 in) earlier in tissue. This causes a pair of large stretch cavities at a depth likely to cause effective wound trauma. When the temporary stretch cavity intersects with the skin at the exit area, a larger exit wound will result, which takes longer to heal. Additionally, when the stretch cavity intersects a stiff organ like the liver, it will cause damage to that organ. However, the wounding potential of M67 is mostly limited to the small permanent wound channel the bullet itself makes, especially when the bullet yaws (tumbles).
Commercial ammunition[edit | edit source]
Commercial Russian-made 7.62×39mm ammunition, such as those sold under the Wolf Ammunition brand name, are also available in Full Metal Jacket (FMJ), Soft Points (SP) and Hollow Points (HP). The Soft Points (SP) and Hollow Points (HP) offer improved accuracy and expansion.
Chinese steel core[edit | edit source]
Chinese military-issue ammunition in this caliber is M43 style with a mild steel core and a thin jacket of copper or brass. Chinese ammunition (as well as all other M43 ammunition) is currently banned from importation in the U.S. because U.S. federal law classifies the round as an armor-piercing handgun round. This classification is based on materials and bullet design rather than on empirical ability to penetrate armor.
Cartridge dimensions[edit | edit source]
The 7.62×39mm has 2.31 ml (35.6 grains H2O) cartridge case capacity.
7.62×39mm maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).
Americans would define the shoulder angle at alpha/2 ≈ 16.4 degrees. The common rifling twist rate for this cartridge is 240 mm (1 in 9.45 in), 4 grooves, Ø lands = 7.62 millimetres (0.300 in), Ø grooves = 7.92 millimetres (0.312 in), land width = 3.81 millimetres (0.150 in) and the primer type is small rifle. According to an American source some barrels can however have a non C.I.P. conform grooves diameter of 7.82 millimetres (0.308 in).
According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines, the 7.62×39mm case can handle up to 355 MPa (51,488 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.
The SAAMI Maximum Average Pressure (MAP) for this cartridge is 45,000 psi (310.26 MPa) piezo pressure.
Basic specifications of 21st century Russian service loads[edit | edit source]
The 7.62x39mm rounds in use with the Armed Forces of the Russian Federation are designed for AKM assault rifles and AK platform derived light machine guns. As per 2003 there were several variants of 7.62x39mm produced for various purposes. All use clad metal as case material.
The 57-N-231 conventional steel-core bullet is designed to engage personnel and weapon systems. The bullet has a steel core. The tip has no distinguishing colour. It can penetrate a 6 mm (0.2 in) thick St3 steel plate at 300 m (328 yd) and 6Zh85T body armour at 30 m (33 yd).
The 57-N-231P is a tracer round designed for fire adjustment and target designation. The bullet has a green tip and the tracer burns for 800 m (875 yd). The 57-T-231PM1 is an improved tracer round which initiates at 50 m (55 yd) from the muzzle and burns for 850 m (930 yd).
||57-N-231||57-N-231P (tracer)||57-T-231PM1 (tracer)|
|Cartridge weight||16.3 g (252 gr)||16.1 g (248 gr)||16.05 g (248 gr)|
|Bullet weight||7.9 g (121.9 gr)||7.57 g (116.8 gr)||7.55 g (116.5 gr)|
|Muzzle velocity||718 m/s (2,356 ft/s)||718 m/s (2,356 ft/s)||718 m/s (2,356 ft/s)|
|Muzzle energy||2,036 J (1,502 ft·lbf)||1,951 J (1,439 ft·lbf)||1,946 J (1,435 ft·lbf)|
|Accuracy of fire at
300 m (328 yd) (R50)
|75 mm (3.0 in)||140 mm (5.5 in)||140 mm (5.5 in)|
- R50 at 300 m (328 yd) means the closest 50 percent of the shot group will all be within a circle of the mentioned diameter at 300 m (328 yd).
Hunting and sport use[edit | edit source]
Since approximately 1990, the 7.62×39mm cartridge has seen some use in hunting arms in the U.S. for hunting game up to the size of whitetail deer, as it is approximately as powerful as the .30-30 Winchester round, and has a similar ballistic profile. Large numbers of imported semiautomatic rifles, such as the SKS and AK-47 clones and variants, are available in this caliber.
In addition, several AR15 manufacturers, such as Colt, Olympic Arms, Del-Ton Inc and ModelOne Sales, are producing 16" carbines and 20" to 24" rifle length firearms that can often get very good accuracy to about 1" groups at 100 yards.
Remington Arms introduced its Compact Model 799 Mini Mauser bolt action rifle chambered in 7.62×39mm in 2006, describing the Mauser action as "sought after by today’s hunters and shooters." The Mauser action is a copy of the Gewehr 98 model rifle's action.
Savage Arms has introduced (around 2010–2011) their own bolt action rifle in 7.62×39mm caliber - Model: 10 FCM Scout.
Both the Sig 516 Russian and the Sig 556r are chambered in 7.62x39mm.
The lower cost and high availability of military surplus ammunition makes this cartridge attractive for many civilian shooters.
Gallery[edit | edit source]
See also[edit | edit source]
References[edit | edit source]
- "Wolf Rifle Ammo". Archived from the original on 5 September 2008. http://web.archive.org/web/20080905121330/http://www.wolfammo.com/index.php?option=com_content&task=view&id=1&Itemid=12. Retrieved 2008-09-05.
- "Sellier & Bellot". http://www.sellier-bellot.cz/rifle-ammunition-detail.php?ammunition=12&product=203. Retrieved 2029.
- "RBCD Performance Plus 112gr Blended Metal Technology Spire Point Ammo. RBCD Dangerous Game Ammo". http://www.ammunitiontogo.com/product_info.php/pName/20rds-762x39mm-rbcd-performance-plus-112gr-bmtsp-ammo/cName/762x39-frangible. Retrieved 2029.
- Monetchikov, Sergei (2005) (in Russian). История русского автомата [The History of Russian Assault Rifle]. St. Petersburg: Military Historical Museum of Artillery, Engineers and Signal Corps. pp. 24–25. ISBN 5-98655-006-4.
- "Патрон - основа оружия. Глава третья. Из истории автоматного 7,62-мм патрона образца 1943 г. (7,62х39)", Оружие 2005/9, pp. 21-44
- C. J. Chivers (2010). The Gun. Simon & Schuster. pp. 166–167. ISBN 978-1-4391-9653-3. http://books.google.com/books?id=r3VwUEHoDikC&pg=PA166.
- Anthony G Williams (November 2012). "ASSAULT RIFLES AND THEIR AMMUNITION:HISTORY AND PROSPECTS". http://www.quarry.nildram.co.uk/Assault.htm. Retrieved 2013-12-08. ""Some sources claim that the 7.62x39 was no more than a copy of a German Geco cartridge for the Vollmer M 35 carbine, designed in 1934/35 by the aforementioned H.G.Winter. However, as we have seen, the cartridges designed for that gun were quite different, having larger case diameters. The round often cited as the model for the M1943 is the 7.62x38.5 "Mittelpatrone", but the diameter of that case is also larger than the M1943's and, according to Dynamit Nobel (Geco's postwar parent company), it dates from 1960; it appears that it was in fact inspired by the M1943, not the other way round. There is therefore no known German cartridge of which the 7.62x39 M1943 could have been a copy. The authors of a Russian history of the M1943, who had access to Soviet archives, were unable to find reliable information as to whether the USSR had any previous knowledge of the development of intermediate rounds in the West.""
- Military rifle bullet wound patterns - by Martin L. Fackler. From: http://www.uthr.org/SpecialReports/Military_rifle_bullet_wound_patterns.htm. Retrieved on November 9, 2011
- http://www.wolfammo.com/pdf/WOLF_Ammo_2008_Catalog.pdf |Wolf Ammunition 2010 catalog
- "US Code: Title 18, Part 1, Chapter 44, § 921". Archived from the original on 20 October 2007. http://web.archive.org/web/20071020054814/http://www4.law.cornell.edu/uscode/html/uscode18/usc_sec_18_00000921----000-.html. Retrieved 2007-09-25.
- C.I.P. decisions, texts and tables free current C.I.P. CD-ROM version download (ZIP and RAR format)
- The 7.62X39 at Guns & Ammmo.com
- ANSI/SAAMI Velocity & Pressure Data: Centerfire Rifle
- Russian 7.62x34mm Rounds for Rifles and Machine Guns, Land Forces Weapons Export Catalog, page 85
- 7.62 cartridges
- Warner, Ken (1989). Gun Digest 1990: 44th Edition. DBI Books. p. 147. ISBN 978-0-87349-038-2. "Trajectories are identical according to Remington"
- "Compact Model 799™ Mini Mauser"
- "CZ 527 Carbine"
- "Savage 10 FCM Scout"
Further reading[edit | edit source]
- (Russian) Юрий Пономарёв "БИОГРАФИЯ ПАТРОНА", КАЛАШНИКОВ. ОРУЖИЕ, БОЕПРИПАСЫ, СНАРЯЖЕНИЕ 2004/8, pp 10–16
- (Russian) К. Соловьев, “"Попурри" для символов 7,62” (factory identification guide), Ружье. Оружие и амуниция 1996/1, pp. 28–33
[edit | edit source]
|Wikimedia Commons has media related to 7.62x39.|
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|