BL 9.2-inch howitzer

BL 9.2-inch howitzer
Australian Battery of 9.2 inch Mark I howitzers in action at Fricourt during the Battle of the Somme, August 1916.
Type	Heavy siege howitzer
Place of origin	United Kingdom
Service history
In service	1914–1945
Used by	United Kingdom Australia Canada United States Belgium Russian Empire
Wars	World War I, World War II
Production history
Designer	Mk I : Coventry Ordnance Works Mk II : Vickers
Designed	1913
Manufacturer	Vickers, Bethlehem Steel
Produced	1914–1918
No. built	All Mks equivalent to 632 complete equipments plus 43 ordnances (UK contracts)
Variants	Mk I, Mk II
Specifications
Mass	Mk II Body, cradle & ordnance only 5 tons 17 cwt
Barrel length	10 ft 1 in (3 m) (Mk I) 13 ft 3 in (4 m) (Mk II)
Shell	HE 290 lb (130 kg)
Caliber	9.2-inch (233.7 mm)
Breech	Welin breech block with Smith-Asbury mechanism
Recoil	Variable Hydro-pneumatic 23-40 inches (MK I) 20-44 inches (MK II)
Carriage	Siege carriage
Elevation	15°–55° (Mk I) 15°–50° (Mk II)
Traverse	30° L & R
Muzzle velocity	1,187 ft/s (362 m/s) (Mk I) 1,600 ft/s (490 m/s) (Mk II)
Maximum firing range	10,060 yd (9,200 m) (Mk. I) 13,935 yd (12,742 m) (Mk. II)

The Ordnance BL 9.2-inch howitzer was the principal counter-battery equipment of British forces in France in World War I. It equipped a substantial number of siege batteries of the Royal Garrison Artillery. It remained in service until about the middle of World War II.

History

The origins of a British heavy "siege" howitzer lie in advances in technology and the 21 cm howitzers used by the German field army. UK had purchased Skoda 9.45-inch howitzer from Austria in 1900 for service in South Africa. A practice camp in the 1900s showed this howitzer's high minimum elevation was a major problem. In due course Britain decided to develop its own heavy weapon, but retained the Skoda transport technique of moving it in three loads on wheeled trailers (either horse or traction towed). A trial gun was received in 1913 and fired at Woolwich and Shoeburyness during the winter. In July 1914 it was sent to the tactical firing range at Rhyader with a siege company. The assessment was "This equipment is a vast improvement on any other in use in the siege artillery, and is worth taking with an army." Major General Von Donop, Master-General of the Ordance, immediately ordered 16 guns and a further 16 were ordered in October 1914. The prototype gun, "Mother", was in action in France on October 31, 1914 and production guns entered service in 1915.

The gun was transported in three loads - body and cradle, bed, barrel - towed either by heavy horses or a Holt tractor. The equipment comprised a segment shaped ground platform assembled from steel section and bolted to a holdfast sunk flush with the ground. An earth box fitted above ground to the front of the holdfast, with 9 long tons (9,100 kg) (Mk 1) or 11 long tons (11,200 kg) (Mk 2) of earth prevented it "bucking". On soft ground, extra beams were used under the holdfast. The carriage was mounted on the platform, it was pivoted at the front and traversed up to 30 degrees left and right by a spur gear engaging a curved toothed rack at the breech end of the platform, with the weight of the carriage on rollers.

The tubular cradle pivoted by the trunnions supported the barrel – a wire bound A tube – and connected it to the hydro-pneumatic recoil system with a floating piston (the first British use of this) and hydraulic buffer. However, the initial design suffered from excessive recoil and was modified in 1916. In 1917 the recoil was further improved by addition of a recoil indicator and cut-off gear. Full recoil (40-inch Mk I, 44-inch Mk II) was allowed at lower elevation, hence absorbing most of the horizontal (i.e. backward) force. A shorter recoil (23-inch Mk I, 20-inch Mk II) was allowed at high elevation where the ground itself could absorb much of the vertical (i.e. downward) recoil force. This prevented the breech from hitting the platform. The barrel had to be depressed 3° for loading, as can be seen in the photograph, shown below, of a howitzer of the Australian 55th Siege Battery.

The Mk I's range was relatively limited and in June 1916 the senior Artillery commander in France, Major General Birch, requested among other artillery improvements an increase in range to 15,000 yards (14,000 m) "even if an increase of the weight of the equipment is entailed". This resulted in the Mark II gun in December 1916, with a heavier maximum propellant charge, a longer barrel and an increased range of 13,935 yards (12,742 m). However, combat experience showed the higher-velocity Mk II barrel had a reduced life, estimated at 3,500 rounds. The average barrel life of a Mk I gun was estimated from combat experience to be 6000 rounds.

Two Mk I howitzers supporting Australian troops near Corbie, May 1918, showing the earth box.

Australian gunners of the 55th Siege Artillery Battery loading a 9.2-inch howitzer, Western Front, July 1916.

Transport (L-R) of barrel, bed, cradle & body

Combat use

One disadvantage of the dismantling system was an inability to fire directly from the travelling carriage the way the BL 8 inch Howitzer could. In addition, the time required to bring the weapon into action was increased. However, the stability of the siege mounting made it "the most accurate of heavy howitzers".

In World War I British service, the gun served only on the Western Front with 36 British, one Australian and two Canadian batteries. Batteries increased in size from four guns to six during 1916–17. Initially, batteries were in Heavy Artillery Groups – usually a single battery of 9.2-inch with the other four batteries being differently equipped. Mid-war Groups were renamed Brigades RGA, and there were different types but the pattern of a single 9.2-inch battery in a brigade was retained.

During World War II, some guns went to France with the British Expeditionary Force, but their main deployment was in the United Kingdom as anti-invasion defences. According to the post-war memoirs of comedian Spike Milligan, who served in the Royal Artillery's 56th Heavy Regiment, 9.2-inch howitzer ammunition was so scarce in the early years of the Second World War that gun-crews in training were reduced to shouting 'bang' in unison, as no shells were available to practice with.

Excerpt from US Army Signal Corps film America Goes Over (1918) showing a howitzer in action.

Gunners of 56th Heavy Regiment with Mk II, May 1940

US service

Bethlehem Steel was already contracted to manufacture 9.2-inch howitzers for Britain before the US entry into World War I in April 1917. The order was to be completed by July 1917 but they failed to meet the contract timescale and a year later deliveries had not been completed. As British manufacturing capacity increased, guns became available for export. The US government ordered 100 from Bethlehem and 132 from Britain to equip the US army building up in France. Sevellon Brown states that in fact Bethlehem could not meet the US order but that 40 were delivered from Britain by the end of the war.

The US Ordnance manual of 1920 describes its current stock of Model of 1917 (Vickers Mk I) and Model of 1918 (Vickers Mk II) as being built both in Britain and USA. The US-built guns may have been British orders to Bethlehem which were redirected to the US army.

Brown describes the US acquisition of the 9.2 as based mainly on the need at the time to utilize immediately available manufacturing capacities, and that acquisition of a howitzer based on the French Schneider 240 mm howitzer for its super-heavy artillery was the main US goal. This view is supported by the 1920 US Ordnance manual which describes the 240 mm howitzer as far superior to the 9.2.

Russian and Soviet service

Only four out of 44 9.2-inch howitzers promised by the allies ended up in the service of the Russian Empire. These four pieces were actually given by Japan in 1917. The Russian designation for the gun was 234-mm Vickers howitzer. An ammunition tally on 15 September 1917 showed 1,110 rounds per gun available in the Russian arsenal. There was however no local production of this ammunition, all had to be imported. Three of the guns were still in service with the Soviet 317th artillery battalion, part of the 13th Army in the winter of 1939-1940, when they were employed against the Mannerheim Line.

Ammunition

The primary ammunition was HE (high explosive) shells filled with Amatol, Trotyl (TNT) or Lyddite. The standard shell weight was 290 pounds (130 kg). However, there were 19 variants of HE shell, some with sub-variants. Later marks of shell had a fill that varied between about 25 and 40 pounds (11 and 18 kg) of HE, and shell bodies varying in length between 28 and 32 inches (71 and 81 cm). There was also some use of Common Pointed shell filled with Shellite. Later fuzes included various versions of No 101, 106 and 188. More than three million rounds of ammunition were expended during the war.

Chemical shells were introduced in 1918, these were filled with mustard gas, a persistent chemical agent. However, only 7000 shells were produced.

Mk II HE shell.

Mk I Trotyl (TNT) shell on the loading platform of "Mother" at the Imperial War Museum, London.

Surviving examples

Imperial War Museum

The prototype "Mother" gun barrel on Mk I production mounting at the Imperial War Museum, London.

The barrel of the original prototype, known as 'Mother' is preserved on a Mk I carriage by the Imperial War Museum. This howitzer was tested at Rhyader in Powys, Wales in July 1914. Sent to France, it was operated by 8th Siege Battery from October 1914. Something of a curiosity, the howitzer was visited by Field Marshal Sir John French on 5 November 1914 and by the Prince of Wales on 18 November. Transferred to 10th Siege Battery in early 1915 it saw use during the battles of Neuve Chapelle in March 1915 and Festubert in May 1915. The weapon returned to Britain in July 1915 and was fired at the Shoeburyness ranges until worn out. With its barrel relined, it was reissued to France in 1917. Acquired by the Imperial War Museum, the howitzer was exhibited at Crystal Palace, from 1920 and at South Kensington from 1924. Around this time, the howitzer served as the model for the Royal Artillery Memorial designed by Charles Sargeant Jagger.

Australian War Memorial

At the Australian War Memorial, Canberra.

A Mk I howitzer, probably used by 55th Siege Battery of the First Australian Imperial Force in 1917, is preserved at the Australian War Memorial (AWM) in Canberra. The weapon was received by the AWM in 1939, later being used at an artillery range at Port Wakefield, South Australia for proof testing before returning to the AWM's stores in April 1949. It was later loaned to the Royal Australian Artillery for display at Holsworthy Barracks, returning to the AWM in 1998.

Charleston, South Carolina

A 9.2-inch howitzer barrel, manufactured in 1918 by the Bethlehem Steel Company, is displayed in White Point Garden in Charleston, South Carolina.

See also

• List of siege artillery

References

Citations

Bibliography

• Official History of the Ministry of Munitions Vol X The Supply of Munitions. 1922. Facsimile reprint by Imperial War Museum and Naval & Military Press, 2008. ISBN 1-84734-884-X
• "Counter-Battery Work" GHQ Artillery Notes No. 3 February 1918. Redistributed by US Army War College April 1918. Provided online by Combined Arms Research Library
• Sevellon Brown, "The story of ordnance in the World War". Washington, James William Bryan Press, circa. 1920.
• Dale Clarke, British Artillery 1914–1919. Heavy Artillery. Osprey Publishing, Oxford UK, 2005 ISBN 1-84176-788-3
• General Sir Martin Farndale, History of the Royal Regiment of Artillery. Western Front 1914–18. London: The Royal Artillery Institution, 1986 ISBN 1-870114-00-0
• Major General Sir John Headlam, The History of the Royal Artillery - From the Indian Mutiny to the Great War Volume II (1899–1914). Woolwich, 1934
• I.V. Hogg, Allied Artillery of World War One. The Crowood Press,Marlborough, 1998
• I.V. Hogg & L.F. Thurston, British Artillery Weapons & Ammunition 1914–1918. London: Ian Allan, 1972
• United States. Army. Ordnance Dept, "Handbook of artillery : including mobile, anti-aircraft and trench matériel", May 1920. See "9.2-Inch Howitzer Matériel (Vickers)" pp. 283–299

External links

• Hamilton, Douglas T (1916). "Chapter III: Forging High-explosive Shells; Chapter VII: Machining British Howitzer Shells". High-Explosive Shell Manufacture. New York: The Industrial Press. http://www.archive.org/details/highexplosiveshe00hamirich. Retrieved 26 October 2013. 
• Kempf, P. "9.2-inch Mark I Howitzer". Landships II. http://www.landships.info/landships/artillery_articles.html?load=/landships/artillery_articles/9_2in_Howitzer.html. Retrieved 26 October 2013. 
• Hartwell, Joseph Allen. "9.2-inch British Howitzer". Defeating the Hun: History of United States Army Coast Artillery Corps During World War One. http://freepages.military.rootsweb.ancestry.com/~cacunithistories/92%20howitzer.html. Retrieved 26 October 2013. 

Media

• Geoffrey Malins (January 1916). "Destruction of a German blockhouse by 9.2 howitzer [film"]. IWM Collections Search. Imperial War Museum. http://www.iwm.org.uk/collections/item/object/1060008218. Retrieved 26 October 2013. 
• "BL 9.2-inch Howitzer Marks I & II". YouTube. http://www.youtube.com/watch?v=otjhHVpQ-kY. Retrieved 26 October 2013.