Military Wiki
Type M2
Type Automatic cannon
Place of origin  German Empire
Service history
In service Imperial German Air Service
Wars World War I
Production history
Designer Reinhold Becker[1]
Designed 1913[1]
Manufacturer Stahlwerke Becker[1]
Number built 539+[1]
Weight 30 kilograms (66 lb)[1]

Cartridge 20x70 RB[1]
Caliber 20 mm (0.787 in)[1]
Barrels 1
Action APMI - advanced primer ignition blowback[1]
Rate of fire 300rpm[1]
Muzzle velocity 490 metres per second (1,600 ft/s)[1]
Feed system magazine

The Becker Type M2 20 mm cannon was a German automatic cannon developed for aircraft use during World War I by Stahlwerke Becker. It was first mass-produced in 1916 and was installed in a variety of aircraft; the only German autocannon to actually see service in the air during the war.[1]

The Becker also served as the pattern for the famous Oerlikon 20 mm cannon, which sees service to this day.


Design & development[]

Development commenced in 1913 and was therefore already advanced when the War Ministry issued a specification in June 1915 calling for an aircraft cannon of under 37 mm caliber and 70 kg weight capable of firing a 10-round burst. Tests commenced shortly thereafter with the weapon mounted in a Gotha G.I, but proved unsatisfactory. Despite this, the potential of the gun was such that the arsenal at Spandau was engaged to help develop and fine-tune the design, leading to a production contract for 120 Becker Type M2 guns in June 1916. In addition to the orders for aircraft guns placed with Becker, Spandau and MAN also received a contract to build Becker cannon for the Army. The Spandau works developed the gun further producing it as the Spandau Type 3 20mm cannon, which was heavier and had a slower rate of fire at 250 rpm.[1]

Operational use[]

The main types to utilise the Type M2 were large aircraft - the Friedrichshafen G.III bomber and AEG G.IVk ground-attack machine. Tests in smaller, single-engined aircraft were not so successful, but were carried out extensively through the rest of the war, commencing with an Albatros J.I in December 1917. Due to the gun's operating principles, it could not be synchronised, and this posed an immediate problem for its installation in this type of plane. The solution adopted after the tests with the Albatros J.I was to mount the gun at an angle to fire downwards. Fitting the gun to a fighter with a pusher configuration was another obvious solution, and trials were carried out with an Albatros D.VI. Other intended installations were for an AGO S.I and the Hansa (Caspar) D.I, but these were not carried out before the Armistice.

Total production figures are not known, but were in excess of 539 (111 by Becker and 428 by MAN); a total of 362 were surrendered to the Allies.[1]

Postwar use and patterns[]

The patent for the gun was bought by SEMAG (Seebach Maschinenbau Aktien Gesellschaft) in 1921, who continued development with a more powerful cartridge as the SEMAG L. After the collapse of SEMAG Oerlikon took over the SEMAG assets in 1924, marketing improved versions as the Oerlikon F, Oerlikon L and Oerlikon S.[1]


The Type M2 was a slim weapon working on the principle of advanced primer ignition blowback. It weighed only 30 kg. It was fed by a somewhat awkward, curved box magazine, available in versions that held 10 or 15 rounds; the latter weighed another 5 kg. As the rate of fire was 325 rounds per minute, this magazine could be emptied very quickly. The muzzle velocity was 490 m/s, which was low compared to the rifle-calibre machine guns of the period such as the German MG 08, but a respectable performance compared to other automatic cannon of the period, such as the Vickers QF 1 pounder pom-pom.


Competing German designs[]

During WWI, at least two other German 20-mm autocannons were designed and saw limited production. One was the 2cm Ehrhardt, the other was the 19-mm (sometimes reported as 20-mm) Szakats.[2][3]

See also[]

  • Oerlikon 20 mm cannon-development of the Becker design in Switzerland after World War I.
  • MG FF cannon-the final German World War II development of the Becker design.


  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 Williams, Anthony G.; Dr. Emmanuel Gustin (2003). Flying Guns World War I, Development of aircraft guns, ammunition and installations 1914-32 (1st ed.). Ramsbury: Airlife Publishing. pp. 89–90. ISBN 1-84037-396-2. 
  2. Williams (2003), p. 91
  3. Chinn (1951), 523-525

Further reading[]

  • Williams, Anthony G. (2000) Rapid Fire Airlife, UK.
  • Grosz, P. "The 2 cm Becker Aircraft canon - development and use." Over the Front 7 (2).
  • George M. Chinn (1951). The Machine Gun, History, Evolution and Development of Manual, Automatic and Airborne Repeating Weapons, Vol. 1. U.S. Government Printing Office.  web version

This page uses Creative Commons Licensed content from Wikipedia (view authors).