Blowback is a system of operation for self-loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gases created by the ignition of the propellant charge. Several types of blowback systems exist within this broad principle of operation, each distinguished by the level of energy derived through the blowback principle and the methods used to control bolt movement. In most actions that use blowback operation, the breech is not locked mechanically at the time of firing: the inertia of the bolt and recoil spring(s), relative to the weight of the bullet, delays opening of the breech until the bullet has left the barrel. A few locked breech designs use a form of blowback (example: primer actuation) to perform the unlocking function.
Other operating principles for self-loading firearms include blow forward, gas operation, recoil operation, Gatling, and chain. The blowback principle may be considered a simplified form of gas operation, since the cartridge case behaves like a piston driven by the powder gases.
- 1 Principle of operation
- 2 Simple blowback
- 3 Advanced Primer Ignition (API) blowback
- 4 Delayed blowback
- 5 Other blowback systems
- 6 Limited-utility designs
- 7 Other autoloading systems
- 8 See also
- 9 References
- 10 Bibliography
- 11 External links
Principle of operation[edit | edit source]
The blowback system is generally defined as an operating system in which energy to operate the firearm's various mechanisms and provide automation is derived from the movement of the spent cartridge case pushed out of the chamber by rapidly expanding powder gases. This rearward thrust, imparted against the bolt, is a direct reaction of the total reaction to the forward thrust applied to the bullet and the expansion of propellant gases. Certain guns will use energy from blowback to perform the entire operating cycle (these are typically designs using relatively "low power" ammunition) while others will use a portion of the blowback to operate only certain parts of the cycle or simply use the blowback energy to enhance the operational energy from another system of automatic operation.
What is common to all blowback systems is that the cartridge case must move under the direct action of the powder pressure, therefore any gun in which the bolt is not rigidly locked and permitted to move while there remains powder pressure in the chamber will undergo a degree of blowback action. The energy from the expansion of gases on firing appears in the form of kinetic energy transmitted to the bolt mechanism, which is controlled and used to operate the firearm's operation cycle. The extent to which blowback is employed largely depends on the manner used to control the movement of the bolt and the proportion of energy drawn from other systems of operation. It is with how the movement of the bolt is controlled where blowback systems differ. Blowback operation is most often divided into three categories, all using residual pressure to complete the cycle of operation: simple blowback, advanced primer ignition and delayed blowback or retarded blowback.
Relating blowback to other types of automatic firearm operation, George M. Chinn wrote that: "In the larger sense, blowback might well be considered a special form of gas operation. This is reasonable because the cartridge case may be conceived of as a sort of piston driven by the powder gases. Actually, blowback involves so many special problems that it is best considered to be in a class by itself. The question whether or not it should be included within the more general class of gas operation or recoil operation is purely academic. The important point is that it partakes some of the properties of both classes and, depending on the particular problem at hand, may be considered to be either one."
Simple blowback[edit | edit source]
The simple (sometimes referred to as the "straight" or "pure") blowback system represents the most basic form of blowback operation and demonstrates the basic principles involved in the blowback cycle. The simple blowback mechanism typically consists of the bolt which rests against the base of the cartridge case and a recoil spring that is compressed by the kinetic energy of the bolt when it is thrown back in recoil. The stored energy of the compressed spring then drives the bolt back forward into firing position.
The cycle begins when the cartridge is fired. With an open-bolt cycle, the bolt is held by the trigger sear to the rear and the recoil spring is fully compressed. Pulling the trigger releases the sear, the action spring then propels the bolt forward, which strips a round from the feed system along the way. The bolt carries a new cartridge into the chamber with considerable velocity and at the end of its travel the firing pin fires the primer, igniting the propellent. The pressure of expanding gases from the propellant sends the projectile down the barrel and at the same time applies an opposite, rearward, bolt thrust force to the shell case against the breech face of the bolt, accelerating the bolt and casing rearward with a force equal to F = ma, where "m" is the mass of the bolt and casing, and "a" is the rate of acceleration of the bolt (the resistance of the recoil spring can be considered to be negligible until the bore pressure drops). The force is also equal to F = PA, where "P" is the instantaneous gas pressure inside the bore, and "A" is the cross-sectional area of the chamber (the pressure force and inertia force are equal and opposite, i.e. same "F" but in opposite directions). The breech is kept sealed by the internal pressure of the cartridge case against the chamber until the bullet has left the barrel; the inertia of the bolt mass ensures this (mass of the bolt + recoil spring, in some cases the hammer force too). At this point the bore pressure is zero and the force driving the bolt back is also zero, but the case and bolt continue to the rear on their own momentum. At the moment the bullet leaves the barrel, the momentum of the bullet and the rearward travelling bolt are equal and opposite, assuming a same diameter bore and chamber, such as the sten gun (which is not true with delayed blowback systems in which some of the momentum is initially transferred directly to the bulk of the gun, or with necked cartridges where the casing is a larger diameter than the projectile). The momentum of the bolt is gradually transferred to the body of the gun and the shooter's body as the recoil spring is compressed. As the bolt travels back, the spent cartridge case is extracted and ejected, and the firing mechanism is cocked by the rearward travelling bolt. The bolt eventually reaches a velocity of zero and the kinetic energy from the recoil impulse is now stored in the fully compressed spring (some energy loss does occur due to friction and the extraction and ejection sequences). The cycle repeats until the last round is expended or the trigger is released engaging the sear to hold the bolt in the rear (open-bolt) position.
To remain practical, this system is only suitable for firearms using relatively low pressure cartridges. Pure blowback operation is typically found on semi-automatic, small-caliber pistols, small-bore semi-automatic rifles and submachine guns. Some low-velocity cannon and grenade launchers such as the Mk 19 grenade launcher also use blowback operation.
The barrel of a blowback pistol is generally fixed to the frame and the slide is held against the barrel only by the recoil spring tension. The slide starts to move rearward immediately upon ignition of the primer. As the cartridge moves rearward with the slide, it is extracted from the chamber and typically ejected clear of the firearm. The mass of the slide must be sufficient to hold the breech closed until the bullet exits the barrel and residual pressure is vented from the bore. A cartridge with too high a pressure or a slide with too little mass may cause the cartridge case to extract early, causing a separation or rupture. This generally limits blowback pistol designs to calibers less powerful than 9x19mm Parabellum (e.g., .25 ACP, .32 ACP, .380 ACP, 9x18mm Makarov, etc.). Any larger and the slide mass starts to become excessive, and therefore few blowback handguns in such calibers exist (see Recoil operation (Short recoil operation) for the method most commonly used by these pistols); the most notable exceptions are simple, inexpensive guns such as those made by Hi-Point Firearms which includes models chambered in .45 ACP, .40 S&W, .380 ACP and 9x19mm Parabellum.
Most simple blowback rifles are chambered for the .22 Long Rifle cartridge. Popular examples include the Marlin Model 60 and the Ruger 10/22. Some blowback rifles or carbines are chambered for pistol cartridges, such as the 9mm Parabellum, .40 S&W and .45 ACP. Examples include the MP-40 and UZI submachine guns. There were also a few rifles that chambered cartridges specifically designed for blowback operation. Examples include the Winchester Model 1905, 1907 and 1910. A very unusual blowback firearm was created by fitting the M1903 Springfield rifle with a mechanism called the Pedersen device which retrofited a semi-automatic repeating action in the space normally occupied by the bolt of the firearm.
Advanced Primer Ignition (API) blowback[edit | edit source]
In the API blowback design, the primer is ignited when the bolt is still moving forward before the cartridge is fully chambered Image. In a plain blowback design, the propellant gases have to overcome static inertia to accelerate the bolt rearwards to open the breech. In an API blowback, they also have to do the work of overcoming forward momentum to stop the forward motion of the bolt. Because the forward and rearward speeds of the bolt tend to be approximately the same, the API blowback allows the weight of the bolt to be halved. Because the momentum of the two opposed bolt motions cancels out over time, the API blowback design results in reduced recoil. According to Anthony G. Williams, the "API blowback principle is used virtually in all sub-machine guns", although "the relatively low pressures and velocities mean that extended chambers and rebated-rim cartridges are not required" for sub-machine guns. In heavier weapons, advanced primer ignition (API) was originally developed by Reinhold Becker for use on the Becker 20-mm automatic cannon. It became a feature of a wide range of designs that can be traced back to Becker's, including the Oerlikon cannon widely used as anti-aircraft weapons during WWII.
To increase performance of API blowback firearms, larger calibre APIB guns such as the Becker and Oerlikon use extended chambers, longer than is necessary to contain the round, ammunition for APIB firearms come with straight-sided cartridges with rebated rims (the rear of the cartridge case is smaller in diameter than the front). The last part of forward motion and the first part of the rearward motion of the case and bolt happen within the confines of this extended chamber. As long as the gas pressure in the barrel is high, the walls of case remain supported and the breach sealed, although the case is sliding rearwards. This sliding motion of the case, while it is expanded by a high internal gas pressure, risks tearing it apart, and a common solution is to grease the ammunition to reduce the friction. The case needs to have a rebated rim because the front end of the bolt will enter the chamber, and the extractor claw hooked over the rim therefore has to fit also within the diameter of the chamber. The case generally has very little neck, because this remains unsupported during the firing cycle and is generally deformed; a strongly necked case would be likely to split. The API blowback design permits the use of more powerful ammunition in a lighter gun that would be achieved by using plain blowback, and the reduction of felt recoil results in further weight savings. The original Becker cannon, firing 20x70RB ammunition, was developed to be carried by WWI aircraft, and weighed only 30 kg. Oerlikon even produced an anti-tank rifle firing 20x110RB ammunition using the API blowback operation, the SSG36. On the other hand, because the design imposes a very close relationship between bolt mass, chamber length, spring strength, ammunition power and rate of fire, in APIB guns high rate of fire and high muzzle velocity tend to be mutually exclusive. API blowback guns also have to fire from an open bolt, which is not conducive to accuracy and means they can't be synchronized to fire through a propeller.
API mechanisms are very sensitive to the ammunition used. For example, when the Germans switched their MG FF (an Oerlikon FFF derivative) to their new, lighter Minengeschoß shell, they had to rebalance the spring strength and bolt weight of the gun, resulting a new MG FF/M model with ammunition not being interchangeable between the two models. The 30 mm MK 108 cannon was perhaps the apogee of API blowback technology during WWII.
According to an United States Army Materiel Command engineering course from 1970, "The advanced primer ignition gun is superior to the simple blowback because of its higher firing rate and lower recoil momentum. However, favorable performance depends on timing that must be precise. A slight delay in primer function, and the gun reverts to a simple blowback without the benefit of a massive bolt and stiffer driving spring to soften the recoil impact. [...] The exacting requirements in design and construction of gun and ammunition reduce this type almost to the point of academic interest only."
An example of API in sub-machine guns is the L2A3 Sterling submachine gun, where the maximum chamber pressure is achieved while the breechblock is still moving forward and is about 0.46 mm away from the rear face of the chamber. The principle is also used in some automatic grenade launchers, for example in the US Mk 19 grenade launcher or Russian AGS-30.
Delayed blowback[edit | edit source]
For more powerful rounds or for a lighter operating mechanism, some system of delayed or retarded blowback is often used, requiring the bolt to overcome some initial resistance while not fully locked. Because of high pressures, rifle-caliber delayed blowback firearms, such as the FAMAS and G3, typically have fluted chambers to ease extraction. Below are various forms of delayed-blowback actions:
Lever delayed[edit | edit source]
Lever-delayed blowback utilizes leverage to delay the opening of the breech. When the cartridge pushes against the bolt face, the lever moves the bolt carrier rearward at an accelerated rate relative to the light bolt. This leverage significantly increases resistance and slows the movement of the lightweight bolt. John Pedersen patented the first known design for a lever-delay system. The mechanism was adapted by Hungarian arms designer Pál Király (a.k.a. Paul de Kiraly) in the 1930s and first used in the Danuvia 43M submachine gun. Other weapons to use this system are the TKB-517/2B-A-40 assault rifles, the AVB-7.62 battle rifle, the San Cristobal .30 carbine, the FAMAS, the BSM/9 M1 and FNAB-43 submachine guns, the Hogue Avenger and Benelli B76 pistols, the Sterling 7.62 and AA-52 machine guns.
Roller delayed[edit | edit source]
Roller-delayed blowback was first used in the experimental MG 42 derivative MG 42V and the 1945 Mauser StG 45(M) prototypes. Roller-delayed blowback operation differs from roller-locked recoil operation as seen in the MG 42. Unlike the MG 42, in roller-delayed blowback the barrel is fixed and does not recoil. As the bolt head is driven rearward, rollers on the sides of the bolt are driven inward against a tapered bolt carrier extension. This forces the bolt carrier rearward at a much greater velocity and delays movement of the bolt head. The primary advantage of roller-delayed blowback is the simplicity of the design compared to gas or recoil operation.
After WWII, former Mauser technicians Ludwig Vorgrimler and Theodor Löffler perfected this mechanism between 1946 and 1950 while working for the French Centre d'Etudes et d'Armament de Mulhouse (CEAM). The first full-scale production rifle to utilize roller-delay was the Spanish CETME followed by the Swiss Sturmgewehr 57, and the Heckler & Koch G3 rifle. The MP5 submachine gun is the most common weapon in service worldwide still using this system. The P9 pistol also uses roller-delayed blowback; however, the Czech cz. 52 is roller-locked.
Gas delayed[edit | edit source]
Gas-delayed blowback should not be confused with gas-operated. The bolt is never locked, and so is pushed rearward by the expanding propellant gases as in other blowback-based designs. However, propellant gases are vented from the barrel into a cylinder with a piston that delays the opening of the bolt. It was used by some World War II German designs for the 7.92×33mm Kurz cartridge, including the Volkssturmgewehr 1-5 rifle (with little effectiveness) and the Grossfuss Sturmgewehr (with slightly more efficiency), and after the war by the Heckler & Koch P7, Steyr GB and M-77B pistols.
Chamber-ring delayed[edit | edit source]
When a cartridge is fired, the case expands to seal the sides of the chamber. This seal prevents high-pressure gas from escaping into the action of the gun. Because a conventional chamber is slightly oversized, an unfired cartridge will enter freely. In a chamber-ring delayed firearm, the chamber is conventional in every respect except for a raised portion at the rear of smaller diameter than the front of the chamber. When the case expands in the front of the chamber and pushes rearward on the slide, it is slowed as this raised portion constricts the expanded portion of the case as the case is extracted. The Seecamp pistol operates on this principle.
Off-axis bolt travel[edit | edit source]
John Browning developed this simple method whereby the axis of bolt movement was not in line with that of the bore. The result was that a small rearward movement of the bolt in relation to the bore axis required a greater movement along the axis of bolt movement, essentially magnifying the resistance of the bolt without increasing its mass. The French MAS-38 submachine gun of 1938 utilizes a bolt whose path of recoil is at an angle to the barrel. The Jatimatic and TDI Vector use modified versions of this concept.
Toggle delayed[edit | edit source]
In toggle-delayed blowback firearms, the rearward motion of the breechblock must overcome significant mechanical leverage. The bolt is hinged in the middle, stationary at the rear end and nearly straight at rest. As the breech moves back under blowback power, the hinge joint moves upward. The leverage disadvantage keeps the breech from opening until the bullet has left the barrel and pressures have dropped to a safe level. This mechanism was used on the Pedersen rifle and Schwarzlose MG M.07/12 machine gun.
Hesitation locked[edit | edit source]
John Pedersen's patented system uses a separate breech block within the slide or bolt carrier. When in battery, the breech block rests slightly forward of the locking shoulder in the frame. When the cartridge is fired, the bolt and slide move together a short distance rearward powered by the energy of the cartridge as in a standard blowback system. When the breech block contacts the locking shoulder, it stops, locking the breech in place. The slide continues rearward with the momentum it acquired in the initial phase. This allows chamber pressure to drop to safe levels while the breech is locked and the cartridge slightly extracted. Once the bullet leaves the barrel and pressure drops, the continuing motion of the slide lifts the breech block from its locking recess through a cam arrangement, continuing the firing cycle. The Remington 51 pistol and SIG MKMS submachine gun were the only production firearms to utilize this type of operating system.
Screw-delayed[edit | edit source]
First used on the Mannlicher retarded blowback rifle of 1893, the bolt in screw-delayed blowback was slowed by the need to rotate steeply pitched interrupted threads on the bolt and receiver. John T. Thompson designed a rifle that operated on a similar principle around 1920 and submitted it for trials with the US Army. This rifle, submitted multiple times, competed unsuccessfully against the Pedersen rifle and Garand primer-actuated rifle in early testing to replace the M1903 Springfield rifle. Mikhail Kalashnikov later developed a prototype submachine gun in 1942 that operated by a screw-delayed blowback principle, which is also found on the Fox Wasp carbine. A pair of telescoping screws delayed rearward movement of the operating parts during the firing cycle. This weapon was ultimately not selected for production.
Other blowback systems[edit | edit source]
Floating chamber[edit | edit source]
David Marshall Williams (a noted designer for the U.S. Ordnance Office and later Winchester) developed a mechanism to allow firearms designed for full-sized cartridges to fire .22 caliber rimfire ammunition reliably. His system used a small 'piston' that incorporates the chamber. When the cartridge is fired, the front of the piston is thrust back with the cartridge giving a significant push to the bolt. Often described as accelerated blowback, this amplifies the otherwise anemic recoil energy of the .22 rimfire cartridge. Williams designed a training version of the Browning machine gun and the Colt Service Ace .22 long rifle version of the M1911 using his system. The floating chamber is both a blowback and gas operated mechanism.
Primer actuated[edit | edit source]
Primer actuated firearms used the force of primer setback to power a mechanism that unlocked and cycled the firearm. John T. Kewish and John Garand were the first to develop the system in an unsuccessful bid to replace the M1903 bolt action rifle in the early 1920s. The Soviet designer Fedor Tokarev also experimented with this principle in rifles in the 1930s.
U.S. Military 30-06 ammunition was used for both rifles and machineguns. Because 'popped' primers caused malfunctions in machineguns, the Army adopted ammunition with crimped primers that did not set back making the Garand rifle unworkable and another Garand design was eventually adopted. AAI Corporation used their developmental piston primer mechanism in a rifle submitted for the SPIW competition. A similar system is used in the spotting rifles on the LAW 80 and Shoulder-launched Multipurpose Assault Weapon use a 9mm, .308 Winchester based cartridge with a .22 Hornet blank cartridge in place of the primer. Upon firing, the Hornet case sets back a short distance, unlocking the action.
Case setback[edit | edit source]
The case cartridge itself has been used experimentally to actuate the action similar to Garand's primer-actuation. Known prototypes using this method of operation include two 1936 rifle designs, one by Mihail Mamontov and another by Makar Goryainov at TsKB-14, and a 1980's design by A.F. Barishev. The Mamontov and Goryainov rifles are only partially automatic; only the bolt unlocking is powered by the gasses pushing the cartridge back, while the rest of the cycle (ejection, reloading) is done manually as in a traditional bolt-action rifle. A major problem with using the case cartridge as piston is that its motion is much faster (about 1 ms) compared compared to tapping gas further down the bore through a piston—about 5 ms in the Dragunov sniper rifle, which used the same cartridge as Mamontov's rifle. Barishev made a fully automatic, but rather bulky mechanism that used a mechanical delay. In his system, the case cartridge pushed back a tilting bolt face, that upon reaching a certain angle pushes backwards an unlocking lever that continues farther before unlocking the bolt. The GRAU however still gave a negative evaluation of Barishev's gun, pointing out that the main problems with reliability of firearms using the cartridge case a piston were known since the 1930s and still unsolved.
Limited-utility designs[edit | edit source]
Blish lock[edit | edit source]
The Blish Lock is a breech locking mechanism designed by John Bell Blish based upon his observation that under extreme pressures, certain dissimilar metals will resist movement with a force greater than normal friction laws would predict. In modern engineering terminology, it is called static friction, or stiction. His locking mechanism was used in the Thompson submachine gun, Autorifle and Autocarbine designs. This dubious principle was later eliminated as redundant in the .45 caliber submachine gun. Lubrication or fouling would completely defeat any delay. Whatever actual advantage a clean, unlubricated Blish system could impart could also be attained by adding a mere ounce of mass to the bolt.
Savage rotating barrel[edit | edit source]
The Savage system employed the theory that the rifling in the barrel caused a rotational force that would hold the gun locked until the projectile left the barrel. It was later discovered that the bullet had left the barrel long before any locking could occur. Savage pistols were in fact operating as pure blow back firearms.
Other autoloading systems[edit | edit source]
Other autoloading systems are:
- Blow forward where the barrel is the only moving component of the weapon that is dragged forward by the friction of the bullet until it leaves the barrel.
- Recoil operation uses the rearward movement of parts of the weapon counter to the ejecta (bullet and propellant) moving forward, as described by Newton's third law of motion.
- Gatling-style crank-operated reloading uses continuous circular motion imparted by the operator to fire cartridges in succession.
- Chain-style mechanisms are similar to Gatling guns but use external energy, such as electrical or hydraulic, for operation.
- Gas-operated reloading
See also[edit | edit source]
References[edit | edit source]
- Chinn, George M.: The Machine Gun, Volume IV: Design Analysis of Automatic Firing Mechanisms and Related Components, p. 3. Bureau of Ordnance, Department of the Navy, 1955.
- Walter H. B. Smith, Rifles, Military Service Publishing Co., 1948, "blowback semiautomatic operation" pp.88-89.
- Chinn, 11.
- Chinn, p. 3
- Chinn, 12.
- "Hi-Point Firearms: Handguns". Hi-Point Firearms. http://www.hi-pointfirearms.com/handguns/hi_point_handguns.html.
- Chinn, page 31.
- Anthony G. Williams, Rapid Fire, Airlife UK 2000, page 65
- Williams, Anthony G., Of Oerlikons and other things…… www.quarry.nildram.co.uk article
- Anthony G. Williams, Rapid Fire, Airlife UK 2000, pages 63-68 Cite error: Invalid
<ref>tag; name "Williams_63" defined multiple times with different content
- Anthony G. Williams, Flying Gun World War I, Airlife UK 2003, pages 89-90
- Automatic Weapons, AMC pamphlet no. 706-260, February 1970, page 2-47
- Charles Q. Cutshaw (2011). Tactical Small Arms of the 21st Century: A Complete Guide to Small Arms From Around the World. Gun Digest Books. ISBN 978-1-4402-2482-9. http://books.google.com/books?id=npHP9aV5rBgC&pg=PT27. Retrieved 8 July 2013.
- U.S. Patent 1,410,270
- Modern firearms - GIAT FAMAS assault rifle (France) world.guns.ru article
- Stevens, R. Blake, Full Circle: A Treatise on Roller Locking, Collector Grade Publications (2006). ISBN 0-88935-400-6.
- Юрий Пономарёв "Автомат Хорна", КАЛАШНИКОВ. ОРУЖИЕ, БОЕПРИПАСЫ, СНАРЯЖЕНИЕ 2006/9, pp. 20-26
- U.S. Patent 1,457,961
- U.S. Patent 1,737,974
- Cliff Carlisle, Japanese Pedersen Semi Auto Rifles & Carbines, www.carbinesforcollectors.com article
- Marshall Cavendish Corporation (2003). How It Works: Science and Technology. Marshall Cavendish. p. 194. ISBN 978-0-7614-7314-5. http://books.google.com/books?id=xYCNNYgNAAYC&pg=PA194.
- Automatic Weapons, AMC pamphlet no. 706-260, February 1970, page 2-40
- Hatcher, Julian, Hatcher's Notebook, The Military Service Press Company (1947), pp. 38-44. ISBN 0-8117-0795-4.
- Hatcher, Julian. (1983). Book of the Garand. Gun Room Pr. ISBN 0-88227-014-1
- "Солдат удачи" номер 9 (72) 2000 Д.Ширяев "Кто изобрел автомат Калашникова"
- Charles E. Petty, Delightful diversion, Guns Magazine, March, 2004.
- S. P. Fjestad (1991). Blue Book of Gun Values, 13th Ed.. p. 291. ISBN 0-9625943-4-2.
- U.S. Patent 1,472,126
- Julian S. Hatcher (1962). Hatcher's Notebook. Stackpole Books. pp. 63–66. ISBN 978-0-8117-0795-4. http://books.google.com/books?id=yESNUKSg5aMC&pg=PA63.
- Р. Чумак БЕЗ ГАЗА. О системе капсюльного двигателя автоматики Токарева, Kalashnikov magazine 2011/7, pp. 48-50
- Flirting With Flechettes: The US Army's Search for the Ideal Rifle Projectile Cruffler.com May 2000 article
- "9 x 51mm SMAW - International Ammunition Association". http://cartridgecollectors.org/cmo/cmo05oct.htm.
- Р. Чумак, ГИЛЬЗОВЫЙ ДВИГАТЕЛЬ. О необычных системах автоматики, Kalashnikov magazine 2012/11, pp. 72-77
- Hatcher, Julian, Hatchers Notebook, The Military Service Press Company (1947), pp. 259-261. ISBN 0-8117-0795-4.
Bibliography[edit | edit source]
- Bremner, Derek, The MG42V and the Origins of Delayed Blowback Roller Lock: WWII German Equipment (Paperback). ISBN 0-9533792-0-5.
- Chinn, George M. (1955). The Machine Gun, Volume IV: Design Analysis of Automatic Firing Mechanisms and Related Components. Washington, D.C.: Bureau of Ordnance, Department of the Navy.
[edit | edit source]
|Wikimedia Commons has media related to Blowback operation.|
- Lever-delayed blowback
- Information about the TZ45 submachine gun and the concept of advanced primer ignition
- Blowback action, Animation and explanation at howstuffworks.com
- HKPro HKPro page explaining the principle, albeit using the "roller-locking" terminology
- Heckler and Koch USA now uses the "roller-delayed blowback" terminology
- Blow-Forward operated submachine gun patent
- Blow-Forward firearm patent
- Lever-Delayed Blowback AK
- Lever-Delayed Blowback AK
- Lever-Delayed Blowback AK
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|