A bore evacuator is a device on the gun barrel of an armoured fighting vehicle which helps prevent poisonous propellant gases from venting back into the vehicle's fighting compartment when the gun breech is opened to load another round. Bore evacuators are most often used on large-calibre tank guns and self-propelled guns. Without bore evacuators, hot gases and other combustion residue leaks into the tank's interior, depleting oxygen levels and filling it with a foul odour that can easily induce nausea and distract the crewmen from their tasks.
The evacuator is a reservoir that holds the super-heated, high-pressure propellant gases produced by the firing of a shell, then releases them as the shell exits the barrel. When not in use, the atmosphere inside the barrel remains the same as the surrounding environment; thus it is the same, or nearly so, inside the evacuator.
As the shell passes through, an opening into the bore takes in the gases, containing them until the shell has exited, then releases them back into the barrel. The openings are angled toward the muzzle, so the stream of still fairly high pressure gas drags both combustion gas in the barrel and fresh air from the open breech toward the muzzle. This reduces the chances of these explosive propellants flowing backwards into the turret, causing combustion as they mingle with oxygen, though this can still happen if the evacuator is poorly designed, poorly maintained, or damaged. Unprotected bore evacuators damaged by bullets have caused considerable problems in past conflicts, but up-armouring solved this problem. Bore evacuators are a common feature of most modern tanks.
References[edit | edit source]
[edit | edit source]
|Wikimedia Commons has media related to Bore evacuators.|
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|