| Ordnance QF 1½ pdr Mk III | |
|---|---|
| Type | Autocannon |
| Place of origin | United Kingdom |
| Service history | |
| In service | 1918 - 1940s |
| Used by |
 United Kingdom |
| Production history | |
| Designer | Coventry Ordnance Works |
| Manufacturer | Coventry Ordnance Works |
| Variants | Mk III, Mk IV |
| Specifications | |
| Mass | 200 pounds (91 kg) for cradle, gun & breech[1] |
| Length | 91.8 inches (2.33 m) total |
| Barrel length | bore of 75 inches (1.9 m)[1] |
|
| |
| Shell | 37x190R HE 1 lb 7 oz (0.65 kg) |
| Calibre | 37 mm (1.457 in) |
| Barrels | 1 |
| Action | automatic, gas operated |
| Muzzle velocity | 1,950 ft/s[1] |
The COW 37 mm gun was a British automatic cannon that was developed as a heavy-calibre aircraft weapon. It was trialled in several installations and specified for the Westland C.O.W. Gun Fighter. However they did not yield results and the weapon did not enter general service.
Design and development[]
Coventry Ordnance Works had been set up in 1905 by a consortium of British shipbuilding firms (John Brown, Cammell Laird and Fairfield) in order to compete with the duopoly of Vickers and Armstrong-Whitworth in producing naval guns. Besides the larger naval gun, COW worked at the smaller end on anti-aircraft guns. There was a demand for a gun that could be mounted on an aircraft. Their first attempt at an automatic gun was a "1-pounder" (the nominal weight of the shell) from a rimless 37x94 cartridge. This developed into a 1½-pounder using a longer 37x190 cartridge in a five-round clip. The gun was ready to produce only as the First World War came to an end and was only in service briefly fitted to a pair of Airco DH4s.[2]
Post war it was tried in a number of different aircraft, mostly flying boats such as the Blackburn Perth, where it was seen as being effective against small vessels but also in fighters. The Air Ministry specifically requested designs that could use the weapon, such as the Westland C.O.W. Gun Fighter and the Vickers Type 161.
After Vickers acquired the Coventry Ordnance Works, the COW 37 mm was used as for the development of the 40 mm Vickers S gun which was used by Hawker Hurricanes as an anti-tank weapon.
In the Second World War, COW guns were used as the armament for the Mk III version of the Armadillo armoured fighting vehicle; the COW gun with its shield on the rear part of the flatbed.[3] The vehicle was used by the RAF for airfield defence and later the Home Guard.
Use[]
Bedford Armadillo Mk III Gun truck fitted with a COW 37 mm gun
- Specification 4/24
- Westland Westbury - One in trainable mount, one fixed mounting
- Bristol Bagshot - Two in trainable mountings
- Specification F9/27
- Westland C.O.W. Gun Fighter One in fixed mounting
- Vickers Type 161 - One in fixed mounting
- Flying boats
- Armstrong Whitworth Sinaia
- Short Cromarty
- Vickers Valentia - tested
- Blackburn Iris
- Short Sarafand
- Blackburn Perth - fitted
- Short Sunderland - planned but not fitted
See also[]
Notes[]
- ↑ 1.0 1.1 1.2 Hogg & Thurston 1972, Page 27
- ↑ http://www.quarry.nildram.co.uk/37-40mm.htm 37 mm and 40 mm guns in British Service
- ↑ http://www.accurate-armour.com/ShowProduct.cfm?manufacturer=0&category=14&subcategory=26&product=1624
References[]
- I.V. Hogg & L.F. Thurston, British Artillery Weapons & Ammunition 1914-1918. London: Ian Allan, 1972
- Flight JUNE 28, 1934
External links[]
 |
Wikimedia Commons has media related to COW 37 mm gun. |
- "THE CANNON PIONEERS", by Anthony G Williams
- "Fighter Armament", August 24, 1950, Flight magazine page 218
- "Flying Battleships" Popular Science, December 1934, page 36 & page 37 show COW 37mm cannon
- "C.O.W. 37mm cannon fitted to Blackburn Perth flying boat" YouTube, shown being fired while moored on water
The original article can be found at COW 37 mm gun and the edit history here.