Military Wiki
Advertisement
Colt-Burgess rifle
File:Burgess RifleSans titre-1.jpg
Colt-Burgess rifle
Type Rifle
Place of origin  United States
Production history
Designer Andrew Burgess
Manufacturer Colt's Patent Firearms Manufacturing Company
Produced 1883-1885
Number built 6,403
Specifications
Weight 8 34 lb (4.0 kg) (octagon barrel rifle); 8 12 lb (3.9 kg) (round barrel rifle); 7 14 lb (3.3 kg) (carbine)[1]
Length 42 34 in (1,090 mm)[1]
Barrel length 25 12 in (650 mm) (rifle); 20 in (510 mm) (carbine)

Cartridge .44-40 Winchester
Action Lever-action
Feed system 15 round (rifle) or 12 round (carbine) tubular magazine

The Colt-Burgess rifle – also known as the 1883 Burgess rifle or simply the Burgess rifle – is a lever-action repeating rifle produced by Colt's Patent Firearms Manufacturing Company between 1883 and 1885. The Burgess rifle was Colt's only entrance into the lever-action rifle market, produced to compete with Winchester Repeating Arms Company's line of popular rifles.[2][3] The 1883 Burgess rifle was designed and patented by Andrew Burgess, an American firearms designer and photographer, who sold the design to Colt.[4][5]

Overview[]

The Colt-Burgess rifle is similar in design to Winchester's lever-action rifles, such as the Winchester Model 1873. It was produced in two versions chambered for the .44-40 Winchester cartridge: a rifle version with a 25 12 in (650 mm) barrel, and a carbine with a 20 in (510 mm) barrel.[2] The rifle features either a full octagon, half-octagon, or round barrel, with the full octagon barrels being the most numerously produced among rifle variants.[1] A tubular magazine is located under the barrel in similar fashion to other lever-action rifles with a capacity of 15 rounds in the rifle version or 12 rounds in the carbine version. The receiver on the Burgess rifle is smaller than the Winchester 1873's, providing for a lighter firearm. The rifle's action, though similar to the Winchester 1873's, is considered to be a stronger design.[1][4] The action utilizes a toggle-joint system to lock the breechblock. The extension of the loading lever is the lower part of the toggle-joint; the upper part of the toggle-joint is linked to the breechblock. Located on the receiver is a sliding loading gate from which cartridges are fed into the magazine; the sliding gate design is in contrast to Winchester's tilting gate. Burgess rifles are finished with either a blued or browned barrel featuring walnut stock and case hardened receiver, hammer, and lever.[1][3]

Colt Burgess toggle-joint

Production[]

Although Colt predominately was a manufacturer of popular revolvers, such as the Colt Single Action Army, the company began in the 1880s to seek to compete against Winchester in the rifle market.[5] In 1882, Colt contacted Andrew Burgess to design a lever-action rifle and by July 1883, production of the new rifle had begun. The Colt-Burgess was produced for sixteen months thereafter, with a total of 6,403 guns manufactured. Approximately 60% of these were of the rifle variation.[1] When compared to production figures of Winchester's 1873 rifle, the Colt-Burgess failed as a serious competitor to Winchester. From 1873 to 1919, Winchester manufactured 720,610 Model 1873 rifles, or an average of over 15,000 per year.[6]

The short production history of the Colt-Burgess has led to much speculation as to the reason of its demise. According to legend, upon hearing of Colt's entrance into the lever-action rifle market, Winchester began to develop a prototype revolver to compete with Colt's market. A "gentleman's agreement" then followed between Colt and Winchester, with Colt agreeing to drop production of the Burgess and Winchester abandoning its plans to develop a revolver. The truth of this story has never been fully verified, and as such, the reason for the Burgess rifle's short production history is unknown.[1][4][5]

Replicas of the Burgess rifle and carbine are currently produced by the Italian manufacturer Uberti chambered for the .45 Colt cartridge.[4][7]

See also[]

References[]

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Waters, Ken (May–June 1982). "Classic Rifles: The Colt-Burgess". Wolfe Publishing Co., Inc.. p. 12–13. ISSN 0162-3583. 
  2. 2.0 2.1 Flayderman, Norm (2007). Flayderman's Guide to Antique American Firearms and Their Values. F+W Media, Inc. p. 122. ISBN 9780896894556. 
  3. 3.0 3.1 Sapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media, Inc. p. 200. ISBN 9780896895348. 
  4. 4.0 4.1 4.2 4.3 Campbell, Dave (September 2010). "Burgess Rifle: Greatness Shortlived". National Rifle Association. http://www.americanrifleman.org/articles/uberti-burgess-rifle-review. Retrieved April 18, 2014. 
  5. 5.0 5.1 5.2 Boorman, Dean K. (2001). The History of Winchester Firearms. Globe Pequot. pp. 52–53. ISBN 9781585743070. 
  6. Flayderman, Norm (2007). Flayderman's Guide to Antique American Firearms and Their Values. F+W Media, Inc. p. 307. ISBN 9780896894556. 
  7. "1883 Burgess Rifle and Carbine". A. Uberti. 2014. http://www.uberti.com/1883-burgess-rifle-and-carbine. Retrieved April 19, 2014. 

External links[]

This page uses Creative Commons Licensed content from Wikipedia (view authors).
Advertisement