The Entwicklung series, more commonly known as the E-series, was a late-World War II attempt by Germany to produce a standardised series of tank designs. There were to be standard designs in six different weight classes, from which several specialised variants were to be developed. This was necessitated by the extremely complex tank designs that had resulted in poor production rates and mechanical unreliability.
The E-series designs were simpler, cheaper to produce and more efficient than their predecessors, however their design involved only modest improvements in armour and firepower over the designs they were intended to replace, such as the Hetzer, Panther G or Tiger II - indeed, most of the lighter E-series vehicles were intended to use what were essentially the Tiger II's steel-rimmed road wheels for their suspension and were meant to overlap each other as on the Tiger II - and would represent the final standardisation of German armoured vehicle design where the American M26 Pershing, the British Centurion Mk 3 and Soviet T-44 tanks, which would have been the Entwicklung series' E-50 and E-75 heavy tank contemporaries and likely opponents.
E-5[edit | edit source]
E-10[edit | edit source]
The E-10 design was developed as a replacement of the Panzer 38(t) and the designs based on it. The 38(t) chassis was enlarged and redesigned. This new design was to be called PzKpfw 38 (d), d standing for deutsch ("German") as opposed to (t) for tschechisch ("Czech"). The designs based on this new chassis would all be in the 10 to 25 tonnes weight class.
E-25[edit | edit source]
The E-25 designs, in the 25-50 tonnes weight class, were to be the replacements of all Panzer III and Panzer IV based designs. This family would include medium reconnaissance vehicles, medium Jagdpanzer and heavy Waffenträger.
E-50 Standardpanzer[edit | edit source]
The E-50 Standardpanzer was intended as a standard medium tank, replacing the Panther and Tiger I and the conversions based on these tanks. The E-50 hull was to be longer than the Panther, in fact it was practically identical to the King Tiger in overall dimensions except for the glacis plate layout. Compared to these earlier designs however, the amount of drilling and machining involved in producing these standardpanzers was reduced drastically, which would have made them quicker, easier and cheaper to produce, as would the proposed conical spring system, replacing their predecessors' complex and costly dual torsion bar system. Other sources shows that a variant of the narrow fronted 'Schmalturm' designed for the Panther Ausf. F would have been used, coupled with a variant of the 88 mm L/71 gun. As indicated by its name, the weight of the E-50 would fall between 50 and 75 tonnes. The Engine was an improved Maybach HL234 which had 900 hp to 1200 hp with supercharging. Maximum speed was supposed to be 60 km/h.
E-75 Standardpanzer[edit | edit source]
The E-75 Standardpanzer was intended to be the standard heavy tank to be used as a replacement of the Tiger II and Jagdtiger. The E-75 would have been built on the same production lines as the E-50 for ease of manufacture, and the two vehicles were to share many components, including the same Maybach HL 234 engine. The E-75 would have had much thicker armour however, and in fact compared to the Tiger II the E-75 had improved hull armour all round. As its name indicates, the resulting vehicle would have weighed in at over 75 tonnes, reducing its speed to around 40 km/h. To offset the increased weight, the bogies were spaced differently than on the E-50, with an extra pair added on each side, giving the E-75 a slightly improved track to ground contact length.
According to some sources, the similarities between the E-50 and the E-75 went further; they were to be equipped with the same turret and 88mm L/71 or L/100 gun, along with an optical rangefinder for increased long range accuracy. German scientists and engineers had successfully designed a Schmalturm, narrow-front turret and infra-red lighting and sights for use on the prototypes of the Panther Ausf. F as the war drew to a close. Other sources however, indicate that the E-75 was to be fitted with the much larger Tiger II turret, which could be adapted to accommodate an even more powerful high velocity 10.5 cm gun.
Many sources indicate that the E-75 had 185mm – 80mm of armor. The original complex suspension by torsion bars was simplified with bogies. The standard Tiger II turret was equipped with 8.8 cm KwK 44 L71 gun. The engine was an improved Maybach HL234 which had 900 hp to 1200 hp with supercharging.
E-100[edit | edit source]
The E-100 was to be a superheavy combat tank designed to be the replacement for the prototype-only, Porsche-designed Maus, with the E-100 developed from an enlarged Tiger II chassis. It was to be fitted with a slightly modified turret from the Maus, although plans also existed for two further turret designs. Development and building of a prototype E-100 started in 1944 but was largely abandoned after Adolf Hitler ordered an end to the development of the Maus. Only the chassis was finished. It was taken to the United Kingdom for evaluation purposes and eventually scrapped.
The turret of the tanks had three versions. One was a Tiger II version, another was the Maus turret, the last one was the Krupp turret.The Maus turret housed 150 or 170 mm KwK gun + secondary 75 mm KwK gun . The Krupp-designed, original turret for Porsche's Maus design housed the deadly 128 mm KwK gun, and a secondary 75 mm KwK gun. The Tiger-Maus Variant only had a 128 mm KwK 44 L/55 (75 rounds). Armour was 240mm-40mm.
Post-war development[edit | edit source]
After the war, The French designed and built the AMX-50 series of armoured fighting vehicles, which used a 1000HP Maybach engine with rear drive, as had been intended for the E-50 and E-75, whilst the idea of external Belleville washer suspension - which was also developed with the Entwicklung series in mind - resurfaced on the Swiss Panzer 61.
Notes[edit | edit source]
References[edit | edit source]
- Information about the E-100 at Panzerworld
- German Tanks of World War II: The Complete Illustrated history of German Armoured Fighting Vehicles 1926-1945, F. M. von Senger und Etterlin, translated by J. Lucas, Galahad Books, New York, 1969, ISBN 0-88365-051-7
- Special Panzer Variants: Development . Production . Operations, Walter J. Spielberger and Hilary L. Doyle, Schiffer Publishing, Atglen PA, 2007, ISBN 978-0-7643-2622-6
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|