Military Wiki
Advertisement
Revolver hangfire

Revolver that has suffered from a hang fire

USS Nicholas (DD-449);0544903

In 1943 the USS Nicholas suffered a hang-fire in its #3 5"/38cal gun mount

Hang fire refers to an unexpected delay between the triggering of a firearm and the ignition of the propellant.[1] This failure was common in firearm actions that relied on open primer pans, due to the poor or inconsistent quality of the powder. Modern firearms are susceptible also. The delay is typically too brief to be noticed, but can be several seconds.

A hangfire should be suspected whenever a firearm fails to fire, but has not clearly malfunctioned. In modern firearms, it is more likely that the round is a "dud" (one that will never fire at all), but it is important to delay removing the round from the chamber. If a hangfire has in fact occurred, a round detonating outside of the firearm could cause serious injury. If the operator believes that the firearm correctly cycled a fresh round and the action is not visibly jammed, the correct procedure is to keep the firearm pointed at a safe target for thirty seconds, then remove the round. This rule is usually not followed in combat, where being without a working firearm is the bigger risk.

The phrase "to hang fire" also means to delay in progressing, for example from one task to another.[2]

References[]

See also[]

All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at Hang fire and the edit history here.
Advertisement