287,300 Pages

Role Torpedo bomber
National origin Germany
Manufacturer Hansa-Brandenburg
First flight 1916
Primary user Imperial German Navy
Number built ca. 20

The Hansa-Brandenburg GW was a floatplane torpedo bomber produced in Germany during World War I for the Imperial German Navy. In configuration, it was similar to the Hansa-Brandenburg G.I land-based bomber, but the GW was substantially larger and heavier. Like the G.I, it was a conventional three-bay biplane design with staggered wings with the lower wing of slightly greater span than the upper. The undercarriage consisted of twin pontoons, each mounted on a separate truss structure, leaving space between them for a single torpedo to be dropped from the underside of the fuselage. The metal trusses that had attached the engines to the sides of the G.I's fuselage were not present in this design, with the engine nacelles carried on struts in the interplane gap.

Specifications (variant)[edit | edit source]

General characteristics

  • Crew: Three
  • Length: 12.57 m (41 ft 4 in)
  • Wingspan: 21.56 m (70 ft 9 in)
  • Height: 4.15 m (13 ft 7 in)
  • Gross weight: 3,938 kg (8,664 lb)
  • Powerplant: 2 × Mercedes D.III, 120 kW (160 hp) each


  • Maximum speed: 105 km/h (65 mph)
  • Range: 500 km (310 miles)
  • Service ceiling: 1,000 m (3,280 ft)


  • 1 × machine gun
  • 1 × torpedo
  • References[edit | edit source]

    • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. pp. 472. 

    This page uses Creative Commons Licensed content from Wikipedia (view authors).
    Community content is available under CC-BY-SA unless otherwise noted.