Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|(what is ?)|
Kevlar is the registered trademark for a para-aramid synthetic fiber, related to other aramids such as Nomex and Technora. Developed at DuPont in 1965, this high strength material was first commercially used in the early 1970s as a replacement for steel in racing tires. Typically it is spun into ropes or fabric sheets that can be used as such or as an ingredient in composite material components.
Currently, Kevlar has many applications, ranging from bicycle tires and racing sails to body armor because of its high tensile strength-to-weight ratio; by this measure it is 5 times stronger than steel on an equal weight basis. It is also used to make modern drumheads that withstand high impact. When used as a woven material, it is suitable for mooring lines and other underwater applications.
- 1 History
- 2 Production
- 3 Structure and properties
- 4 Thermal properties
- 5 Applications
- 5.1 Protection
- 5.2 Sports equipment
- 5.3 Music
- 5.4 Other uses
- 6 Composite materials
- 7 See also
- 8 References
- 9 External links
History[edit | edit source]
Poly-paraphenylene terephthalamide – branded Kevlar – was invented by Polish-American chemist Stephanie Kwolek while working for DuPont, in anticipation of a gasoline shortage. In 1964, her group began searching for a new lightweight strong fiber to use for light but strong tires. The polymers she had been working with at the time, poly-p-Phenylene-terephthalate and polybenzamide, formed liquid crystal while in solution, something unique to those polymers at the time. The solution was "cloudy, opalescent upon being stirred, and of low viscosity" and usually was thrown away. However, Kwolek persuaded the technician, Charles Smullen, who ran the "spinneret", to test her solution, and was amazed to find that the fiber did not break, unlike nylon. Her supervisor and her laboratory director understood the significance of her accidental discovery and a new field of polymer chemistry quickly arose. By 1971, modern Kevlar was introduced. However, Kwolek was not very involved in developing the applications of Kevlar.
Production[edit | edit source]
Kevlar is synthesized in solution from the monomers 1,4-phenylene-diamine (para-phenylenediamine) and terephthaloyl chloride in a condensation reaction yielding hydrochloric acid as a byproduct. The result has liquid-crystalline behavior, and mechanical drawing orients the polymer chains in the fiber's direction. Hexamethylphosphoramide (HMPA) was the solvent initially used for the polymerization, but for safety reasons, DuPont replaced it by a solution of N-methyl-pyrrolidone and calcium chloride. As this process was patented by Akzo (see above) in the production of Twaron, a patent war ensued.
Kevlar (poly paraphenylene terephthalamide) production is expensive because of the difficulties arising from using concentrated sulfuric acid, needed to keep the water-insoluble polymer in solution during its synthesis and spinning.
Several grades of Kevlar are available:
- Kevlar K-29 – in industrial applications, such as cables, asbestos replacement, brake linings, and body/vehicle armor.
- Kevlar K49 – high modulus used in cable and rope products.
- Kevlar K100 – colored version of Kevlar
- Kevlar K119 – higher-elongation, flexible and more fatigue resistant.
- Kevlar K129 – higher tenacity for ballistic applications.
- Kevlar AP – has 15% higher tensile strength than K-29.
- Kevlar XP – lighter weight resin and KM2 plus fiber combination.
- Kevlar KM2 – enhanced ballistic resistance for armor applications
Structure and properties[edit | edit source]
When Kevlar is spun, the resulting fiber has a tensile strength of about 3,620 MPa, and a relative density of 1.44. The polymer owes its high strength to the many inter-chain bonds. These inter-molecular hydrogen bonds form between the carbonyl groups and NH centers. Additional strength is derived from aromatic stacking interactions between adjacent strands. These interactions have a greater influence on Kevlar than the van der Waals interactions and chain length that typically influence the properties of other synthetic polymers and fibers such as Dyneema. The presence of salts and certain other impurities, especially calcium, could interfere with the strand interactions and caution is used to avoid inclusion in its production. Kevlar's structure consists of relatively rigid molecules which tend to form mostly planar sheet-like structures rather like silk protein.
Thermal properties[edit | edit source]
Kevlar maintains its strength and resilience down to cryogenic temperatures (−196 °C); in fact, it is slightly stronger at low temperatures. At higher temperatures the tensile strength is immediately reduced by about 10–20%, and after some hours the strength progressively reduces further. For example at 160 °C (320 °F) about 10% reduction in strength occurs after 500 hours. At 260 °C (500 °F) 50% strength reduction occurs after 70 hours.
Applications[edit | edit source]
Protection[edit | edit source]
Cryogenics[edit | edit source]
Kevlar is often used in the field of cryogenics for its low thermal conductivity and high strength relative to other materials for suspension purposes. Most often used to suspend a paramagnetic salt enclosure from a superconducting magnet mandrel in order to minimize any heat leaks to the paramagnetic material. It is also used as a thermal standoff or structural support where low heat leaks are desired.
Armor[edit | edit source]
Kevlar is a well-known component of personal armor such as combat helmets, ballistic face masks, and ballistic vests. The PASGT helmet and vest used by United States military forces since the 1980s both have Kevlar as a key component, as do their replacements. Other military uses include bulletproof facemasks used by sentries and spall liners used to protect the crews of armoured fighting vehicles. Even Nimitz-class aircraft carriers include Kevlar armor around vital spaces. Related civilian applications include Emergency Service's protection gear if it involves high heat (e.g., tackling a fire), and Kevlar body armor such as vests for police officers, security, and SWAT.
Personal protection[edit | edit source]
Kevlar is used to manufacture gloves, sleeves, jackets, chaps and other articles of clothing designed to protect users from cuts, abrasions and heat. Kevlar based protective gear is often considerably lighter and thinner than equivalent gear made of more traditional materials.
Sports equipment[edit | edit source]
It is used as an inner lining for some bicycle tires to prevent punctures. In table tennis, plies of Kevlar are added to custom ply blades, or paddles, in order to increase bounce and reduce weight. It is used for motorcycle safety clothing, especially in the areas featuring padding such as shoulders and elbows.
In fencing it is used in the protective jackets, breeches, plastrons and the bib of the masks.
Tennis racquets are often strung with Kevlar.
It is even used in sails for high performance racing boats.
It is increasingly being used in the "peto", the padded covering which protects the picadors' horses in the bullring.
Shoes[edit | edit source]
With advancements in technology, Nike used Kevlar in shoes for the first time. It launched the Elite II Series, with enhancements to its earlier version of basketball shoes by using Kevlar in the anterior as well as the shoe laces. This was done to decrease the elasticity of the tip of the shoe in contrast to nylon used conventionally as Kevlar expanded by about 1% against nylon which expanded by about 30%. Shoes in this range included LeBron, HyperDunk and Zoom Kobe VII. However these shoes were launched at a price range much higher than average cost of basketball shoes.
Music[edit | edit source]
Audio equipment[edit | edit source]
Kevlar has also been found to have useful acoustic properties for loudspeaker cones, specifically for bass and midrange drive units. Additionally, Kevlar has been used as a strength member in fiber optic cables such as the ones used for audio data transmissions.
Bowed string instruments[edit | edit source]
Kevlar can be used as an acoustic core on bows for string instruments. Kevlar's physical properties provide strength, flexibility, and stability for the bow's user. To date, the only manufacturer of this type of bow is CodaBow.
Drumheads[edit | edit source]
Kevlar is sometimes used as a material on marching snare drums. It allows for an extremely high amount of tension, resulting in a cleaner sound. There is usually a resin poured onto the Kevlar to make the head airtight, and a nylon top layer to provide a flat striking surface. This is one of the primary types of marching snare drum heads. Remo's "Falam Slam" Patch is made with Kevlar and is used to reinforce bass drum heads where the beater strikes.
Woodwind reeds[edit | edit source]
Kevlar is used in the woodwind reeds of Fibracell. The material of these reeds is a composite of aerospace materials designed to duplicate the way nature constructs cane reed. Very stiff but sound absorbing Kevlar fibers are suspended in a lightweight resin formulation.
Other uses[edit | edit source]
Fire dancing[edit | edit source]
Wicks for fire dancing props are made of composite materials with Kevlar in them. Kevlar by itself does not absorb fuel very well, so it is blended with other materials such as fiberglass or cotton. Kevlar's high heat resistance allows the wicks to be reused many times.
Frying pans[edit | edit source]
Kevlar is sometimes used as a substitute for Teflon in some non-stick frying pans.
Rope, cable, sheath[edit | edit source]
The fiber is used in woven rope and in cable, where the fibers are kept parallel within a polyethylene sleeve. The cables have been used in suspension bridges such as the bridge at Aberfeldy in Scotland. They have also been used to stabilize cracking concrete cooling towers by circumferential application followed by tensioning to close the cracks. Kevlar is widely used as a protective outer sheath for optical fiber cable, as its strength protects the cable from damage and kinking. When used in this application it is commonly known by the trademarked name Parafil.
Electricity generation[edit | edit source]
Kevlar was used by scientists at Georgia Institute of Technology as a base textile for an experiment in electricity-producing clothing. This was done by weaving zinc oxide nanowires into the fabric. If successful, the new fabric would generate about 80 milliwatts per square meter.
Building construction[edit | edit source]
A retractable roof of over 60,000 square feet (5,575 square metres) of Kevlar was a key part of the design of Olympic Stadium (Montreal)|Montreal's Olympic stadium for the 1976 Summer Olympics. It was spectacularly unsuccessful, as it was completed ten years late and replaced just ten years later in May 1998 after a series of problems.
Brakes[edit | edit source]
Expansion joints and hoses[edit | edit source]
Kevlar can be found as a reinforcing layer in rubber bellows expansion joints and rubber hoses, for use in high temperature applications, and for its high strength. It is also found as a braid layer used on the outside of hose assemblies, to add protection against sharp objects.
Particle physics[edit | edit source]
A thin Kevlar window has been used by the NA48 experiment at CERN to separate a vacuum vessel from a vessel at nearly atmospheric pressure, both 192 cm in diameter. The window has provided vacuum tightness combined with reasonably small amount of material (only 0.3% to 0.4% of radiation length).
Smartphones[edit | edit source]
Marine Current Turbine and Wind turbine[edit | edit source]
The Kevlar fiber/epoxy matrix composite materials can be used in marine current turbine (MCT) or wind turbine due to their high specific strength and light weight compared to other fibers.
Composite materials[edit | edit source]
Aramid fibers are widely used for reinforcing composite materials, often in combination with carbon fiber and glass fiber. The matrix for high performance composites is usually epoxy resin. Typical applications include monocoque bodies for F1 racing cars, helicopter rotor blades, tennis, table tennis, badminton and squash rackets, kayaks, cricket bats, and field hockey, ice hockey and lacrosse sticks.
See also[edit | edit source]
References[edit | edit source]
- Stephanie Kwolek, Hiroshi Mera and Tadahiko Takata “High-Performance Fibers” in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a13_001
- "What is Kevlar". DuPont. http://www.dupont.com/kevlar/whatiskevlar.html. Retrieved 2007-03-28.
- Wholly Aromatic Carbocyclic Polycarbonamide Fiber Original Kevlar patent awarded in 1974 to Stephanie Kwolek
- Tatsuya Hongū, Glyn O. Phillips, New Fibers, Ellis Horwood, 1990, p. 22
- J. K. Fink, Handbook of Engineering and Specialty Thermoplastics: Polyolefins and Styrenics, Scrivener Publishing, 2010, p. 35
- "Inventing Modern America: Insight — Stephanie Kwolek:". Lemelson-MIT program. Archived from the original on May 24, 2009. http://www.webcitation.org/query?url=http%3A%2F%2Fweb.mit.edu%2Finvent%2Fwww%2Fima%2Fkwolek_bio.html&date=2009-05-24. Retrieved May 24, 2009.
- "Stephanie Louise Kwolek Biography". Bookrags. Archived from the original on May 24, 2009. http://www.webcitation.org/query?url=http%3A%2F%2Fwww.bookrags.com%2Fbiography%2Fstephanie-louise-kwolek-woi%2F&date=2009-05-24. Retrieved May 24, 2009.
- Quinn, Jim. "I was able to be Creative and work as hard as I wanted". American Heritage Publishing. Archived from the original on May 24, 2009. http://www.webcitation.org/query?url=http%3A%2F%2Fwww.americanheritage.com%2Farticles%2Fmagazine%2Fit%2F2003%2F3%2F2003_3_60.shtml&date=2009-05-24. Retrieved May 24, 2009.
- How Kevlar® works: a simple introduction. Explainthatstuff.com (2009-12-07). Retrieved on 2012-05-26.
- Kevlar K-29 AP Technical Data Sheet – Dupont
- Kevlar XP – Dupont
- Kevlar KM2 Technical Description. dupont.com. Retrieved on 2012-05-26.
- Quintanilla, J. (1990). "Microstructure and properties of random heterogeneous materials : a review of theoretical results". pp. 559–585.
- Michael C. Petty, Molecular electronics: from principles to practice, John Wiley & Sons, 2007, p. 310
- KEVLAR Technical Guide. dupont.com. Retrieved on 2012-05-26.
- Body Armor Made with Kevlar. (2005-0604). DuPont the Miracles of Science. Retrieved November 4, 2011
- Kevlar – DuPont Personal Protection. .dupont.com. Retrieved on 2012-05-26.
- Pagen, Dennis (1990). "Paragliding Flight: Walking on Air". Pagen Books. p. 9. ISBN 0-936310-09-X.
- Audio speaker use. Audioholics.com (2009-07-23). Retrieved on 2012-05-26.
- Welcome to Kevlar. (2005-06-04). DuPont the Miracles of Science. Retrieved November 4, 2011
- carbon fiber bows for violin, viola, cello and bass. CodaBow. Retrieved on 2012-05-26.
- carbon fiber bows for violin, viola, cello and bass. CodaBow. Retrieved on 2012-05-26.
- Tailpieces and Tailcords Aitchison Mnatzaganian cello makers, restorers and dealers. Retrieved on 2012-12-17.
- "FibraCell Website". http://www.fibracelldirect.com/.
- M.Rubinstein, R.H.Colby, Polymer Physics, Oxford University Press, p337
- Fabric Produces Electricity As You Wear It. Scientific American (2008-02-22). Retrieved on 2012-05-26.
- Roof of the Montreal Olympic Stadium at Structurae
- Clem's Baseball ~ Olympic Stadium. Andrewclem.com. Retrieved on 2012-05-26.
- Droid RAZR. (2011-10-11). Motorola Mobility. Retrieved November 4, 2011
- Wang, Jifeng; Norbert Müller (December 2011). "Numerical investigation on composite material marine current turbine using CFD". pp. 334–340. http://link.springer.com/article/10.2478%2Fs13531-011-0033-6?LI=true#. Retrieved 26 December 2012.
- Kadolph, Sara J. Anna L. Langford. Textiles, Ninth Edition. Pearson Education, Inc 2002. Upper Saddle River, NJ
- D. Tanner, J. A. Fitzgerald, B. R. Phillips (1989). "The Kevlar Story – an Advanced Materials Case Study". pp. 649–654. Digital object identifier:10.1002/anie.198906491.
- E. E. Magat (1980). "Fibers from Extended Chain Aromatic Polyamides, New Fibers and Their Composites". pp. 463–472. Bibcode 1980RSPTA.294..463M. Digital object identifier:10.1098/rsta.1980.0055. JSTOR 36370.
- Ronald V. Joven. Manufacturing Kevlar panels by thermo-curing process. Los Andes University, 2007. Bogotá, Colombia.
[edit | edit source]
|Wikimedia Commons has media related to Kevlar.|
|Wikimedia Commons has media related to Aramid.|
- Kevlar Home Page
- Kevlar – Design Dictionary. Illustrated article about Kevlar
- Matweb material properties of Kevlar
- U.S. Patent 5,565,264
- Kevlar in body armor
- Synthesis of Kevlar
- Aberfeldy Footbridge over the River Tay
- Kevlar at Plastics Wiki
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|