FANDOM

255,189 Pages

Question book-new

This article does not contain any citations or references. Please improve this article by adding a reference. For information about how to add references, see Template:Citation.

Me 609
Messerschmitt Me 609 model.jpg
A model of the Me 609.
Role Heavy fighter
Manufacturer Messerschmitt
Status Unrealised project
Developed from Messerschmitt Me 309

The Messerschmitt Me 609 was a short-lived World War II German project which joined two fuselages of the Me 309 fighter prototype together to form a heavy fighter. The project was initiated in response to a 1941 Reich Air Ministry requirement for a new Zerstörer (heavy fighter) to replace the Bf 110 in a minimum time and with minimum new parts. Messerschmitt's response was the Me 609, which would use the failed Me 309 project to form the basis of the new fighter.

The Me 609 would have joined the two Me 309 fuselages with a new center wing section into which the two inboard wheels of the landing gear would retract. The Me 609 kept the Me 309's tricycle undercarriage which resulted in an ungainly six-wheel arrangement. The Me 609 would have had its cockpit in the port fuselage, the starboard being smoothed over.

The finished project would have been used as both a heavy fighter and Schnellbomber, but by the time designs were being ironed out, the revolutionary Me 262 turbojet negated the need for further piston-engined fighter design.

Specifications (Me 609, as designed)Edit

Data from[citation needed]

General characteristics
  • Crew: one, pilot
  • Length: 9.72 m (31 ft 11 in)
  • Wingspan: 15.75 m (52 ft 6 in)
  • Height: 3.43 m (11 ft 3 in)
  • Empty weight: 5,247 kg (11,660 lb)
  • Loaded weight: 6,534 kg (14,520 lb)
  • Powerplant: 2 × Daimler-Benz DB 603, () each

Performance

  • Maximum speed: 760 km/h (472 mph)</ul>Armament
 </ul>

See alsoEdit

External linksEdit

This page uses Creative Commons Licensed content from Wikipedia (view authors).
Community content is available under CC-BY-SA unless otherwise noted.