Military Wiki
Register
Advertisement
French370mmRailwayHowitzer1917

French 370 mm railway howitzer of World War I

A railway gun, also called a railroad gun, is a large artillery piece, often surplus naval ordnance, mounted on, transported by, and fired from a specially designed railway wagon. Many countries have built railway guns, but the best known are the large Krupp-built pieces used by Germany in World War I and World War II. Smaller guns were often part of an armoured train.

Railway guns have been rendered obsolete by advances in technology. Their large size and limited mobility make them vulnerable to attack, and similar payloads can be delivered by aircraft, rocket, or missile.

Design considerations[]

The design of a railway gun has three issues over and above those of an ordinary artillery piece to consider. Namely how the gun is going to be traversed - i.e. moved from side to side to aim; how the horizontal component of the recoil force will be absorbed by the gun's carriage and how the vertical recoil force will be absorbed by the ground.

Methods of traverse[]

Railway Gun Types

Non-traversing (top); car traversing mount (middle); top carriage traversing mount (bottom)

12inchRailwayHowitzersMkVCatterick12December1940

British 12-inch Mk V howitzers on top-carriage traversing mounts, traversed 90°, WWII

The first method of traverse is to rely entirely on movement along a curved section of track or on a turntable with no provision to traverse the gun on its mount. The second is to traverse the rail car body on its trucks, known as a car-traversing mount. Generally this is limited to a few degrees of traverse to either side unless an elaborate foundation is built with a center pivot and traversing rollers. The design of the foundation is the only limit to the amount of traverse allowed in this latter case. The third choice is to allow the separate gun mount to rotate with respect to the rail car body, known as a top-carriage traversing mount. This usually requires the gun to be mounted on a central pivot which, in turn, is mounted on the car body. With few exceptions these types of mounts require some number of outriggers, stabilizers, or earth anchors to keep them in place against the recoil forces and are generally more suitable for smaller guns. The American post-World War I assessment of railway artillery considered that the utility of even a small amount of traverse for fine adjustments was high enough that either of the two latter traversing methods is preferable to a fixed mount.[1]

Recoil systems[]

Railway Artillery Recoil Systems Diagrams

Cradle recoil (top); top carriage recoil (second); sliding recoil (third); rolling recoil (bottom)

French Railway Gun 27627u

This French 320 mm railway gun uses sliding recoil. The jacked-down sleepers are visible at full-size.

274mmMle1870-81

This French 274 mm howitzer used a combination of top-cradle and sliding recoil.

There are four primary methods to absorb the recoil force for railway guns: cradle recoil, top-carriage recoil, sliding recoil and rolling recoil.

Cradle recoil means that the gun recoils backward in its cradle, retarded and stopped by hydraulic buffers. It is returned to battery, or the firing position, by either helical springs or by air in a pneumatic recuperator cylinder that is compressed by the force of recoil. This is the most common method used for lighter railroad guns and for virtually all field artillery designed after the French introduced their Canon de 75 modèle 1897.

Top-carriage recoil is where the gun is mounted in an upper carriage that moves on wheels on fixed rails. The gun and upper carriage recoil together, restrained by the usual hydraulic buffers. Return to battery is effected either by gravity, through the use of inclined rails, which the gun and carriage have run up, by springs, or even by rubber bands, on some improvised mounts.[2] It is not well-suited to firing at high elevations because it can't absorb much of the vertical component of the recoil force.[3]

Sliding recoil has the car body sitting on a set of wooden crossbeams or "sleepers" placed underneath it which have been jacked down on to a special set of girders incorporated into the track so that about half the weight of the mount has been transferred to them from the trucks. The gun, car body and trucks all recoil together with the friction generated by the crossbeams sliding on the girders absorbing the recoil force after moving only about 1 to 2 metres (3.3 to 6.6 ft) to the rear. The sleepers must be jacked up again to allow the gun to roll forward to its firing position. This was often done by handwheels driving gear trains attached to the wheels, or even by electric motors on more modern mounts. Almost all of these type of mounts were of the non-traversing type and had to be fired from a curved section of track or turntable. The American post-World War I assessment of railway artillery praised its ruggedness, ease of manufacture and convenience in service, but acknowledged its unsuitability for smaller guns, due to excessive time of operation and lack of traverse, and that it was not suitable for the largest howitzers firing at high angles because of the enormous trunnion forces.[3]

With rolling recoil the entire gun, mount and everything rolls backward, typically between 30 to 50 feet (9.1 to 15.2 m), restrained only by the brakes. The mount was winched back into firing position by cables fastened to the track. This system was usually combined with cradle recoil because the springs of the trucks cannot withstand the vertical component of the recoil force alone. This type of mount was usually fitted with car-traverse. It was unsuitable for smaller guns due to the lack of traverse.[3] The great advantage of this method is that it requires minimal preparation and can fire from any suitable section of curved track.[4]

The methods were often used in combination with each other. Examples include the French 520 mm (20 in) railway howitzer which used cradle-sliding recoil. The American's 14"/50 caliber railway gun Mark II used cradle-rolling recoil as did the 14 and 12 inch railway guns from Great Britain. Only the oldest weapons used a combination of top-cradle and sliding recoil. One example being the earliest mounts for the British designed BL 9.2 inch Railway Gun.

Anchorage[]

RRArtilleryAnchorages

No anchorage needed (top); truck platform anchorage (middle); ground platform anchorage (bottom)

240 mm St Chamond railway gun diagram

French St Chamond 240 mm Canon de Mle 1893/96, WWI, using ground platform anchorage

The combination of rolling and cradle-recoil methods absorbed both the horizontal and vertical components of the recoil force and needed no special preparations, but all other types required some method to transmit the vertical force to the ground. One way is to build a platform on either the ties or the ground with girders, beams, pads or floats. The horizontal component would be alleviated by either sliding recoil or rail clamps, guys or struts to secure the mount in place. The French Schneider 194 mm (7.6 in) and 240 mm (9.4 in) mounts and the British 9.2 inch guns and 12 inch howitzers used rail clamps or guys. The American 8 in (200 mm) gun and the French 240 mm Canon de Mle 1893/96 M used struts.[4]

The other method is build a firing position and recoil pit (épi de tir in French) underneath the tracks, using either heavy timbers like the French 340 mm (13 in) and 400 mm (16 in) howitzers or an elaborate concrete or steel base. These latter were mostly used by the Germans for the 21 cm (8.3 in) and larger railway guns and by the French for their Batignolle mounts. Generally, for these emplacements the rails merely served to guide the gun into position and the gun was often mounted on a central pivot to allow up to 360° of traverse. The primary drawback of these positions was the lengthy time to build them.

History[]

19th century[]

The idea of railway guns was first suggested in Russia in 1847 by Gustav Kori (proposal),[5] following by Ye. Repin (project, 1855), Pyotr Lebedev (who outlined the theoretical foundations of the railway artillery in Primeneniye Zheleznykh Dorog k Zashite Materika, 1857) and P. Fomin (developed a project of a large-calibre cannon, 1860).[6][7]

American Civil War[]

US Civil War railway gun and crew

A railway gun used in the Siege of Petersburg

BradyRailroadGun

The "Dictator", Petersburg (Mathew Brady)

The first railway gun used in combat was a banded 32-pounder Brooke naval rifle mounted on a flat car and shielded by a sloping casemate of railroad iron. On 29 June 1862, Robert E. Lee had the gun pushed by a locomotive over the Richmond and York River line (later part of the Southern Railway) and used at the Battle of Savage's Station to interfere with General George McClellan's plans for siege operations against Richmond during the Union advance up the peninsula.[8] Photographic evidence exists of at least one Union 13-inch siege mortar mounted on a rail car during the Siege of Petersburg. It was nicknamed the Dictator or the Petersburg Express.[9] Another photo exists of a gun mounted on an armored rail car with the caption of "Railway battery used in siege of Petersburg" although no textual evidence survives in support of the caption, which makes the claim that it is a photo of the Confederate gun from 1862 dubious.

France[]

France also used improvised railway guns during the Siege of Paris (1870–1871)[citation needed] and the United Kingdom mounted a few 4.7 in (120 mm) guns on railway cars which saw action during the Siege and Relief of Ladysmith during the Second Boer War.[10] A 9.2 inch gun was taken from the Cape Town coast defenses and mounted on a rail car to support the British assault on Boer defences at Belfast, north-east of Johannesburg, but the battle ended before it could get into action.[11]

In France, Lt. Col Peigné is often credited with designing the first railway gun in 1883. Commandant Mougin is credited with putting guns on railcars in 1870. The French arms maker, Schneider offered a number of models in the late 1880s and produced a 120 mm (4.7 in) gun intended for coastal defense, selling some to the Danish government in the 1890s. They also designed a 200 mm (7.9 in) model for Peru in 1910, but they were never delivered.[12]

World War I[]

The outbreak of the First World War caught the French with a shortage of heavy field artillery. In compensation, large numbers of large static coastal defense guns and naval guns were moved to the front, but these were typically unsuitable for field use and required some kind of mounting. The railway gun provided the obvious solution. By 1916, both sides were deploying railway guns. Baldwin Locomotive Works delivered five 14"/50 caliber railway guns on trains for the United States Navy during April and May 1918. Each train transported and supported a Mk 4 14"/50 caliber gun,[13] a 14 in (360 mm) naval rifle used on New Mexico and Tennessee-class battleships, mounted on a rail carriage with four 6-wheel bogies. The locomotive, ammunition cars, supporting equipment cars, and accommodation cars for the crew were under the command of a United States Navy lieutenant, and under overall command of Rear Admiral Charles Peshall Plunkett. After delivery by ship, these trains were assembled in St. Nazaire in August[14] and fired a total of 782 shells during 25 days on the western front at ranges between 27 and 36 kilometres (30,000 and 39,000 yd). The railway carriages could elevate the guns to 43 degrees, but elevations over 15 degrees required excavation of a pit with room for the gun to recoil and structural steel shoring foundations to prevent caving of the pit sides from recoil forces absorbed by the surrounding soil. The train included cars to transport recoil pit foundations, constructed by Baldwin.[15] One of these guns is on display outside the museum at the Washington Navy Yard.

Baldwin constructed six similar gun carriages and two of an improved Mk II type[13] designed to permit firing the gun at all elevation angles without transferring weight to a separate foundation. These eight guns were completed too late to see combat, although some were stationed through World War II in special coast defense installations at San Pedro, California (near Los Angeles) and at the Panama Canal Zone where they could be shifted from one ocean to the other in less than a day. Improved carriages were designed to allow transport to several fixed firing emplacements including concrete foundations where the railway trucks were withdrawn so the gun could be rapidly traversed (swiveled horizontally) to engage moving ship targets.[16]

The United States constructed approximately fifty smaller depressed center railway carriages on two 6-wheel bogies for 8 inch (203 mm) naval rifles made surplus by the Washington Naval Treaty.[17] Approximately a dozen of these were used for the defense of Oahu. Others were stationed through World War II for coast defense of Manila, Bermuda, Newfoundland, Puget Sound, the Columbia River, Chesapeake Bay, Delaware Bay, and Fort Hancock, New Jersey (near New York City).[18]

In 1930 the US Army tested 12 inch mortars that were train based that could be moved to different locations of the country in a time of crisis.[19]

Schneider of France developed the Obusier de 520 modèle 1916, a 20 inch (520mm) railway "Fort Buster" to do what the German 16" Big Bertha had done at the outbreak of World War I and reduce the German forts in the final line of German defences. One was destroyed in trials and the other did not complete firing trials prior to the signing of the Armistice. The gun remained in storage and was captured by the Germans during World War II. It later formed part of the German artillery complement during the Siege of Leningrad. The gun was disabled by a premature detonation and later abandoned.

World War II[]

The Second World War saw the final use of the railway gun, with the massive 80 cm (31 in) Schwerer Gustav gun, the largest artillery piece to be used in combat, deployed by Germany. The rise of the aeroplane effectively ended the usefulness of the railway gun. Similar to battleships, they were massive, expensive, and, in the correct conditions, easily destroyed from the air.

18inchRailwayHowitzerBocheBusterWWII

Boche Buster, seen from Bourne Park Tunnel on the Elham Valley line, at Bishopsbourne in Kent, 21 March 1941

Both Germany and Great Britain employed railway-mounted guns that were capable of firing across the English Channel between the areas around Dover and Calais.[20] Germany employed a number of 40 cm guns. Britain employed three 13.5-inch (342.9 mm) railway mounted guns on the East Kent Light Railway, located around Lydden and Shepherdswell.[20][21][22] These were known as Gladiator, Sceneshifter and Peacemaker.[20] 9.2 inch Mark 13 guns were located near Canterbury and Hythe, Kent; and 12 inch howitzers, Mk 3 and 5, located around Guston,[20] north of Dover on the Southern Railway line to Deal and Ramsgate.

The 18 inch Howitzer, Boche Buster, featured here, was sited on the Elham Valley Railway, between Bridge, Kent, and Lyminge, and was intended for coastal defence against invasion. It was not capable of cross-channel firing, having a maximum range of only 20 km (12 miles).

Surviving railway guns[]

  • In the United Kingdom, a BL 18 inch Howitzer barrel survives. This was constructed too late to see service in World War 1; it was put into service during World War 2, but never saw action. The weapon has been displayed at the Royal Artillery headquarters at Larkhill since 2008, but is currently on loan to the Spoorwegmuseum, the Dutch national rail museum.[23]
A second 283mm Krupp K5 can be seen at the Todt Battery museum, near Audinghen in northern France.[25]
  • Soviet-era 305mm MK-3-12 guns are preserved at the Krasnaya Gorka fort near Lomonosov, Russia, and the Museum of Railway Technology, Saint Petersburg.
  • The last surviving American-made Bethlehem 177 coastal railway gun is now on display at Museu Militar Conde de Linhares in Rio de Janeiro, Brazil.

See also[]

References[]

Citations
  1. Miller, p. 39
  2. Miller, p. 52
  3. 3.0 3.1 3.2 Miller, p. 65
  4. 4.0 4.1 Miller, p. 69
  5. (Russian) http://www.travelzone.lv/lib/zd_puski/index.php
  6. Lebedev, P. N. (2011) [1857] (in Russian). Применение железных дорог к защите материка. Сочинение инженер-подполковника П. Лебедева [Use of Railways for the Defense of Land. Essay of engineer-Lieutenant Colonel P. Lebedev]. Moscow: Kniga po Trebovaniyu. ISBN 978-5-458-11821-7. 
  7. Denisov, A. P.; Perechnev, Yu. G. (1956). "Глава 4. Береговая артиллерия в Крымской войне 1853–1856 годов [Chapter 4. Coastal Artillery in the Crimean War of 1853–1856]". Русская береговая артиллерия [Russian Coastal Artillery]. Moscow: Voenizdat. pp. 89–91. http://militera.lib.ru/tw/denisov_perechnev/04.html. 
  8. Phillips, p. 225
  9. Miller, pp. 9-16
  10. Miller, p. 23
  11. Hall
  12. Miller, pp. 17, 23
  13. 13.0 13.1 The United States Naval Railway Batteries in France. Navy Department, Office of Naval Records and Library, Historical Section. Publication Number 6. Washington, Government Printing Office, 1922.
  14. Many, April 1965, p.53
  15. Westing (1966) pp.79-80
  16. Lewis (1979) pp. 103, 106
  17. Campbell 1985 p.127
  18. Lewis (1979) pp. 103-104, 140-141
  19. "Mortar Railway Gun to Aid in Defending Coast" Popular Mechanics, December 1930
  20. 20.0 20.1 20.2 20.3 Arnold (1982), Pp. 100, 108, 147, 148.
  21. Dale Clarke. "British Artillery 1914-19. Heavy Artillery". Osprey Publishing, London, 2005. Pages 41-42
  22. http://www.doverpages.co.uk/big_guns.htm The Big Guns At Dover WW2 World War Two
  23. "The UK's largest artillery piece, 1 of 12 surviving wartime railway howitzers in the world, is being moved for exhibition in the Netherlands.". United Kingdom Government. 27 March 2013. https://www.gov.uk/government/news/britains-biggest-gun-aims-for-holland. Retrieved 2013-04-08. 
  24. Doyle, pp. 3
  25. Batterie Todt museum website
Bibliography

External links[]

All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at Railway gun and the edit history here.
Advertisement