Military Wiki
SS Manhattan (1962)
SS Manhattan (1962).jpg
SS Manhattan in 1969
Builder: Fore River Shipyard
Fate: Scrapped c.1987
General characteristics as built
Type: Oil tanker
Length: 940 ft (290 m)
Beam: 132 ft (40 m)
Speed: 17–18 knots (31–33 km/h; 20–21 mph)
Capacity: 115,000
General characteristics post conversion
Type: Oil tanker icebreaker
Length: 1,005 ft (306 m)
Beam: 148 ft (45 m)
Draft: 52 ft (16 m)
Installed power: 43,000 shp (32,000 kW)
Speed: 17 knots (31 km/h; 20 mph)
Capacity: 106,000

SS Manhattan was an oil tanker constructed at the Fore River Shipyard in Quincy, Massachusetts that became the first commercial ship to cross the Northwest Passage in 1969. Having been built as an ordinary tanker in 1962, she was refitted for this voyage with an icebreaker bow in 1968–69. Registered in the United States at the time, she was the largest US merchant vessel as well as the biggest icebreaker in history. Manhattan remained in service till 1987. After an accident in East Asia she was scrapped in China.

1969 Northwest Passage transit[]

Manhattan's route began in August 1969 on the east coast of North America and transited the passage from east to west via the Baffin Sea and Viscount Melville Sound. The master of Manhattan was Captain Roger A. Steward. Heavy sea ice blocked the way through M'Clure Strait, so a more southerly route through Prince of Wales Strait and south of Banks Island was used. A single, token barrel of crude oil was loaded at Prudhoe Bay and then the ship went back. She was escorted by the Canadian Coast Guard icebreaker CCGS John A. Macdonald. At various times during the expedition, Manhattan was supported by the icebreakers CCGS Louis S. St-Laurent, USCGC Staten Island, and USCGC Northwind.

This route through the Northwest Passage was quite controversial in international relations as sovereignty of these waters is claimed by Canada and this claim has been disputed by the United States. The Government of Canada has defined all waters in the Canadian Arctic Archipelago as being "Canadian Internal Waters."

The voyage prompted passionate discussions in Canada about that country's sovereignty in the Arctic, a topic that dominated Arctic policy formulated under Prime Minister Pierre Trudeau's administration throughout the 1970s. At one point during the voyage, Inuit hunters stopped the vessel and demanded that the vessel master ask permission to cross through Canadian territory, which he did, and they granted. The Canadian sovereignty debate generated by Manhattan is being rekindled as multi-year decreases in sea ice, due to global climate change, make further ship transits likely in the future. The question is whether the passage can be considered an international strait or not.

The official reason for the voyage revolved around oil that had been discovered at Prudhoe Bay in 1968. Oil companies reasoned that sea transport of oil by icebreaking supertankers would be cheaper than the building of the Trans-Alaska Pipeline System to Valdez. A second attempt to cross the passage in winter proved impossible, and there were numerous environmental concerns with the project, so it was cancelled and the Trans-Alaska pipeline built.

The conversion of Manhattan was a co-operation between Esso and Wärtsilä, a Finnish shipbuilding company. Wärtsilä Icebreaking Model Basin (WIMB), the 50-metre (160 ft) ice tank built inside a converted air raid shelter in Helsinki, Finland, solely for this project, was later used for the company's own purposes until a new facility was built in the 1980s. Aker Arctic Technology Inc, a Finnish engineering company that specializes in the design of icebreakers and operates an ice model test facility, thus owes its existence to the Manhattan project.[1]

See also[]

  • Territorial claims in the Arctic
  • Northern Sea Route
  • Double acting ship


  1. Wilkman, Göran (2009), 40 years of ice model testing, Aker Arctic, Helsinki, Finland.

External links[]

This page uses Creative Commons Licensed content from Wikipedia (view authors).