|ShVAK 20 mm|
|Place of origin||USSR|
|In service||From 1936|
|Used by||Soviet armed forces|
|Wars||From World War II|
|Designer||Boris Shpitalniy and Semyon Vladimirov|
|Produced||1936 - 1946|
|Variants||three 20 mm variants for aircraft mounts|
plus, one tank variant (TNSh)
also, 12.7 mm predecessor
|Weight||39.92 kg (88 lb)|
|Length||1,679 mm (66.1 in) for the wing-mounted version|
|Cartridge weight||(OZ) 96.0|
|Caliber||20 mm (0.787 in)|
|Rate of fire||700–800 rounds/min|
|Muzzle velocity||750–790 metres per second (2,500–2,600 ft/s)|
|Filling weight||(OZ) 2.8 g HE + 3.3 g incendiary|
|(OZ) Nose fuze|
The ShVAK (Russian: ШВАК: Шпитальный-Владимиров Авиационный Крупнокалиберный, Shpitalnyi-Vladimirov Aviatsionnyi Krupnokalibernyi, "Shpitalny-Vladimirov large-calibre for aircraft") was a 20 mm autocannon used by the Soviet Union during World War II. It was designed by Boris Shpitalniy and Semyon Vladimirov and entered production in 1936. ShVAK were installed in many models of Soviet aircraft. The TNSh was a version of the gun produced for light tanks (Russian: ТНШ: Tankovyi Nudel’man-Shpitalnyi).
Development and production[edit | edit source]
12.7 mm ShVAK[edit | edit source]
The development of the 12.7 mm ShVAK was in response to a Soviet government decree passed on 9 February 1931, directing domestic manufacturers to produce an aircraft machine gun for the 12.7×108mm cartridge that had been introduced a couple of years before for the DK machine gun. Tula designer S.V. Vladimirov answered the call by producing basically an enlarged version of the ShKAS, with a 1246 mm long barrel and a total length of 1726 mm. The first prototype was ready for trials on May 28, 1932. The testing process was fairly drawn out, but the 12.7 mm ShVAK was nominally adopted into service in 1934.
Series production officially started in 1935 at the INZ-2 factory in Kovrov, but production soon fell well behind schedule because the ShVAK receiver was fairly complex to manufacture. According to Soviet records, out of the 410 12.7 mm ShVAKs planned for aircraft in 1935, only 86 were completed; for the tank version, 40 had been planned but only 6 were delivered that same year. A 1952 Western intelligence report indicates that only "a few" ShVAKs were produced in the 12.7 mm caliber.
A further problem complicating the adoption of the gun was that the 12.7 mm ShVAK ended up not using the 12.7×108mm rimless cartridge used by the DS machine gun, but rather—because it was an adaptation of the ShKAS mechanism—it required its own rimmed 12.7 mm cases. Production of the rimmed 12.7 mm ammunition ceased in 1939, when it was decided that the Berezin UB was preferable because it could share ammunition with the DShK.
20 mm ShVAK[edit | edit source]
The 20 mm ShVAK was designed sometime between 1935 and 1936 and series production began in 1936. A few months later, production of the 12.7 mm version ceased. Similarly to its predecessors, the 20 mm ShVAK was a gas-operated gun, belt-fed by disintegrating link ammunition.
Depending on the intended mount, the ShVAKs were marked with "MP" for the tank version (total gun length 2122 mm; weight 44.5 Kg), "KP" for the wing-mounted version (1679 mm total length; 40 Kg), "TP" for flexible mounts (1726 mm length; 42 Kg), and "SP" for synchronized installations.
The "bird-cage" feed system in the 20 mm ShVAK was an improved version of the ShKAS. It could hold 11 rounds and had an even smoother operation. As with the ShKAS, the purpose of the feed cage was to gradually delink the rounds, avoiding any belt lurch. The Berthier-type gas regulator had four holes (of 3.5, 4, 4.5, and 6 mm) allowing for different rates of fire to be selected. The most significant design difference from the ShKAS was that the gas cylinder was moved under the barrel in the ShVAK, giving it a more compact assembly.
The end of the barrel was threaded, and this thread was used to screw on a blast-reduction tube of a length that depended on the installation requirements:
One of the outstanding features of this weapon is the method of solving blast tube difficulties, a troublesome problem in all installations of aircraft cannon in fighter aircraft. The Soviets' simple solution was to thread the end of their standard barrel and then screw on for whatever length was needed a heavy piece of tubing, the bore diameter of which was slightly greater than that of the rotating band of the projectile. This arrangement allowed the blast and gas to leak around the projectile before it cleared the tube, not only reducing the blast effect of the weapon but also by its added length safely leading the blast and project past potions of the plane that would otherwise have been injured.
The 1952 Western intelligence report concluded that the 20 mm ShVAK was "in relation to its power, the gun is very light and extremely compact" and that it "has a range comparable to our M3 cannon, although their short barrel version is 16 pounds lighter". It was however considered "relatively difficult to produce" in American factories, because it was constructed from relatively soft parts (not heat-treated) that were then filed down. This choice of materials was assumed motivated by the desire to allow parts to "deform and bend well in advance of fracture" enabling a safer operation at a high rate of fire, but having the tradeoff of shorter overall lifespan of the gun.
Soviet archives indicate the 20-mm ShVAK was produced in large numbers during World War II:
- 1942 — 34,601 produced
- 1943 — 26,499
- 1944 — 25,633
- 1945 — 13,433
- 1946 — 754
After the war, the ShVAK was supplanted by the Berezin B-20, which offered similar performance but weighed significantly less.
Installations[edit | edit source]
Three Polikarpov I-16 aircraft, all produced in January 1939, were armed with the propeller-synchronized version of the 12.7 mm ShVAK; this short series was given the I-16 Type 16 designation. The three fighter planes successfully passed the factory trials and were delivered to the VVS for military trials. The cancelled Yatsenko I-28 was also planned to use the 12.7 mm ShVAK in a synchronized pair, but the few prototypes which flew in the summer of 1939 did so without armament because a synchronizer for their engine had not been developed.
The 20 mm ShVAK was installed in wing or synchronized mounts in the following fighters: Polikarpov I-153P and I-16, Yakovlev Yak-1, Yakovlev Yak-3, Yakovlev Yak-7B, LaGG-3, Lavochkin La-5 and La-7, the Petlyakov Pe-3 night fighter and on Soviet-modified Hawker Hurricane aircraft. It was also installed on the wings of the Tupolev Tu-2 bomber and some ground attack versions of the Petlyakov Pe-2 bomber also had it installed in a fixed mounting. Some early versions of the Ilyushin Il-2 ground attack aircraft also carried it, but superseded in that aircraft by the 23 mm Volkov-Yartsev VYa-23. The flexible-mount ShVAK was used in the Petlyakov Pe-8 and Yermolayev Yer-2 bombers.
Ammunition[edit | edit source]
ShVAK ammunition consisted of a mix of fragmentation-incendiary and armor piercing-incendiary rounds.
|USSR Designation||US Abbreviation||Bullet Weight [g]||Muzzle Velocity [m/s]||Description|
|OZ||HEI||96.0||770||Nose fuze, 2.8 g HE + 3.3 g incendiary|
|OZT||HEI-T||96.5||770||Nose fuze, 2.8 g HE + 3.3 g incendiary, tracer|
||Nose fuze, 6.7 g HE, fragmentation grooves on shell|
|OFZ||HEI-Frag.||91.0||790||Nose fuze, 0.8 g HE + 3.8 g incendiary, fragmentation grooves on shell|
|BZ||API-HC||96.0||750||Mild steel projectile case with hardened steel core, surrounded
by 2.5 g incendiary, screwed on aluminum, or bakelite ballistic cap
||As above but with swaged steel nose cap|
||Solid steel shot with incendiary in swaged steel cap|
||As above but with tracer in base cavity|
||Inert filled HEI shell with dummy fuze|
||Empty solid head projectile with swaged tracer in base cavity|
There were problems with ammunition development as well. There were cases of premature cook-off of the ammunition in the barrel. The problem was first addressed in 1936 by changing the fuse from the MG-3 model to the MG-201 model, but the problem was not completely eliminated until the introduction of the K-6 fuse in 1938, which reliably prevented projectiles from arming until they were 30 to 50 cm out of the barrel.
See also[edit | edit source]
- Berezin B-20
- Volkov-Yartsev VYa-23
- List of firearms
- List of Russian weaponry
- List of common WW2 weapons
References[edit | edit source]
- Shirokorad, pp. 74-75
- Борцов А.Ю. "Пятилинейный", Мастер-ружье issue 110, May 2006, pp. 56-62
- Chinn, p. 93
- Chinn, vol. 2, pp 178-180
- Shirokorad, p. 75
- Chinn, p. 72 for designations; weights and lengths for three of the four variants is given in Shirokorad, pp. 75-76
- Chinn, p. 85-86
- Chinn, p. 85
- Chinn, p. 82
- Chinn, p. 82-84
- Shirokorad, p. 77
- Маслов М. А. (2008) (in Russian). Истребитель И-16. Норовистый "ишак" сталинских соколов. Яуза / Коллекция / ЭКСМО. pp. 55–57. ISBN 978-5-699-25660-0.
- Shirokorad, p. 77 mentions all the above except for the Yak 3
- Shirokorad, p. 77; although omits the Il-2
- Shirokorad, pp. 76-77
- Широкорад А.Б. (2001) История авиационного вооружения Харвест (Shirokorad A.B. (2001) Istorya aviatsionnogo vooruzhenia Harvest. ISBN 985-433-695-6) (History of aircraft armament)
- Koll, Christian (2009). Soviet Cannon - A Comprehensive Study of Soviet Arms and Ammunition in Calibres 12.7mm to 57mm. Austria: Koll. p. 117. ISBN 978-3-200-01445-9. http://www.russianammo.org.
- Chinn, George M. The Machine Gun, Vol II, Part VII. US Department of the Navy, 1952
[edit | edit source]
|Wikimedia Commons has media related to ShVAK cannon.|
- 20mm TNSh Tank Gun at battlefield.ru
- THE RUSSIAN AMMUNITION PAGE - 20MM TO 25MM
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|