Military Wiki

Victorinox "Huntsman" Swiss Army knife, with knife chain and belt clip.

Wenger RangerGrip 75 Swiss army knife.

The Swiss Army knife (French language: couteau suisse, German language: Schweizer Offiziersmesser: "Swiss officer's knife", Swiss-German: Sackmesser, Italian language: Coltellino svizzero ) is a brand of pocket knife or multi-tool manufactured by Victorinox AG and Wenger SA. The term "Swiss Army knife" was coined by US soldiers after World War II due to the difficulty they had in pronouncing the German name.[1]

The Swiss Army knife generally has a sharp blade, as well as various tools, such as screwdrivers, a can opener, and many others. These attachments are stowed inside the handle of the knife through a pivot point mechanism. The handle is usually red, and features a Victorinox or Wenger "cross" logo or, for Swiss military issue knives, the coat of arms of Switzerland.

Originating in Ibach, Switzerland, the Swiss Army knife was first produced in 1891 after the company Karl Elsener, which later became Victorinox, won the contract to produce the Swiss Army's Modell 1890 knife from the previous German manufacturer. In 1893 the Swiss cutlery company Paul Boéchat & Cie, which later became Wenger, received its first contract from the Swiss military to produce model 1890 knives; the two companies split the contract for provision of the knives from 1908 until Victorinox acquired Wenger in 2005.

The design of the knife and its versatility have both led to worldwide recognition.[2]



Modell 1890, the first Swiss Soldier Knife produced by Wester & Co. Solingen

During the late 1880s, the Swiss Army decided to purchase a new folding pocket knife for their soldiers. This knife was to be suitable for use by the army in opening canned food and disassembling the Swiss service rifle, the Schmidt-Rubin M1889, which required a screwdriver for assembly.

In January 1891, the knife received the official designation Modell 1890. The knife had a blade, reamer, can-opener, screwdriver, and grips made out of dark oak wood that was later partly replaced with ebony wood. At that time no Swiss company had the necessary production capacity, so the initial order for 15,000 knives was placed with the German knife manufacturer Wester & Co. from Solingen, Germany. These knives were delivered in October 1891.

In 1891, Karl Elsener, then owner of a company that made surgical equipment, set out to manufacture the knives in Switzerland itself. At the end of 1891 Elsener took over production of the Modell 1890 knives, but Elsener was not satisfied with its first incarnation. In 1896, Elsener succeeded in attaching tools on both sides of the handle using a special spring mechanism: this allowed him to use the same spring to hold them in place, an innovation at the time.[3] This allowed Elsener to put twice as many features on the knife. On 12 June 1897 this knife featuring a second smaller cutting blade, corkscrew, and wood fiber grips was originally registered with the patent office as The Officer's and Sports Knife, though it was never part of a military contract.[4]

Karl Elsener used the cross and shield to identify his knives, the symbol still used today on Victorinox-branded versions. When his mother died in 1909, Elsener decided to name his company "Victoria" in her memory. In 1921 the company started using stainless steel to make the Swiss Army Knife. Stainless steel is also known as "inox", short for the French term acier inoxydable.[5] "Victoria" and "inox" were then combined to create the company name "Victorinox".[6] Victorinox's headquarters and show room are located in the Swiss town of Ibach.

Victorinox and Wenger[]

Elsener, through his company Victorinox, managed to control the market until 1893, when the second industrial cutler of Switzerland, Paul Boéchat & Cie, headquartered in Delémont in the French-speaking region of Jura, started selling a similar product. This company was later acquired by its then General Manager, Theodore Wenger, and renamed the Wenger Company. In 1908 the Swiss government, wanting to prevent an issue over regional favouritism, but perhaps wanting a bit of competition in hopes of lowering prices, split the contract with Victorinox and Wenger, each getting half of the orders placed. By mutual agreement, Wenger has advertised as the Genuine Swiss Army Knife and Victorinox used the slogan, the Original Swiss Army Knife.

On April 26, 2005 Victorinox acquired Wenger, becoming once again the sole supplier of knives to the Swiss Armed Forces. Victorinox had kept both consumer brands intact, but on January 30, 2013, Wenger and Victorinox announced that the separate knife brands were going to be merged into one brand: Victorinox. Wenger's watch and licensing business will continue as a separate brand.[7]

After World War II[]

According to Carl Elsener, head of Victorinox in 2009, US soldiers bought Swiss Army knives in huge numbers at PX stores on military bases following the conclusion of the Second World War. As German language: Schweizer Offiziersmesser was too difficult for them to say, they called it the "Swiss Army knife", the name by which the knife is now most commonly known worldwide.[2]

Swiss military knife contract[]

The One-Hand German Army Knife as issued by the Bundeswehr since 2003

In 2007, the Swiss Government made a request for new updated soldier knives for the Swiss military for distribution in late 2008. The evaluation phase of the new soldier knife began in February 2008, when Armasuisse issued an invitation to tender. A total of seven suppliers from Switzerland and other countries were invited to participate in the evaluation process. Functional models submitted by suppliers underwent practical testing by military personnel in July 2008, while laboratory tests were used to assess compliance with technical requirements. A cost-benefit analysis was conducted and the model with the best price/performance ratio was awarded the contract. The order for 75,000 soldier knives plus cases was worth SFr 1.38 million. This equates to a purchase price of SFr 18.40, €12.12, £17.99 in October 2009 per knife plus case.

Victorinox won the contest with a knife based on the One-Hand Germany Army Knife as issued by the German Bundeswehr and released in the civilian model lineup with the addition of a toothpick and tweezers stored in the nylon grip scales (side cover plates) as the One-Hand Trekker/Trailmaster model. Mass production of the new Soldatenmesser 08 (Soldier Knife 08) for the Swiss Armed Forces was started in December 2008.[8]



File:Victorinox Cybertool.JPG

The Victorinox Cybertool

The Giant by Wenger

Various models of Swiss Army knives exist, with different tool combinations for specific tasks designed for everyday carry. The simplest model sold includes only a single blade. The most common tools featured are, in addition to the main blade, a smaller second blade, tweezers, toothpick, corkscrew, can opener, bottle opener, slotted/flat-head screwdriver(s), phillips-head screwdriver, nail file, scissors, saw (regular, wood), file, reamer, hook (parcel carrier, tightening aid for shoelaces, etc.), magnifying glass, ballpoint pen, fish scaler, hex wrench (with drive bits), pliers, gimlet, compass, ruler and keyring.

Recent technological features include USB flash drives, digital clock, digital altimeter, LED light, laser pointer, and MP3 player.[citation needed] The Victorinox Cybertools series includes features for use with computers and electronic equipment. In addition to the usual tools, including pliers and scissors, they have a 4 mm hex screwdriver bit holder and bit case with 4 double-ended bits (8 ends).[9]

In January 2010 Victorinox announced the Presentation Master model line to be released in April 2010. The technologically most advanced model includes a laser pointer, a 32 GB detachable flash drive and Bluetooth.[further explanation needed] One of the Presentation Master models will be the bladeless Presentation Master Flight model. Besides being lightweight, protected and portable, this bladeless Presentation Master version is permitted to be carried on airplanes. For added convenience, the flash drive component is removable, offering travelers the option to carry their data while storing their pocket tool in their checked baggage.[10]

Since 2006 Wenger has produced a knife called "The Giant" that includes every implement the company has ever made.[11] With 87 tools and 141 different functions it is recognised by the Guinness Book of Records as the world's most multifunctional penknife.[12] It retails for about EUR 798 or USD 1,000, though some vendors demand much higher prices.[13]

In the same year Victorinox released SwissChamp XAVT which includes 80 functions, with retail price of USD 425.[14] The Guinness Book of Records recognizes a unique 314-blade Swiss Army-style knife made in 1991 by Master Cutler Hans Meister as the world's largest penknife, weighing 11 pounds.[2]

Locking mechanisms[]

Dual liner lock system as used in the Soldatenmesser 08 and various other Victorinox 111 mm models

Some Swiss Army knives feature a locking mechanism for one or two tools. The employed locking systems make an accidental closure during use of an extended tool unlikely. Several Wenger and Victorinox models feature a locking cutting blade secured by a slide lock that is operated with an unlocking-button integrated in the scales. Furthermore several models from the Victorinox 111 mm series feature a more robust double liner lock that secures the cutting blade and bottle opener.[15]

Design and materials[]

Rivets and flanged bushings made from brass hold all machined steel parts and other tools, separators and the scales together. The rivets are made by cutting and pointing appropriately sized bars of solid brass.

The separators between the tools have been made from aluminium alloy since 1951. This makes the knives lighter. Previously these separating layers were made of nickel-silver.[16]

The martensitic stainless steel alloy used for the cutting blades is optimized for high toughness and corrosion resistance and has a composition of 15% chromium, 0.60% silicon, 0.52% carbon, 0.50% molybdenum, and 0.45% manganese and is designated X55CrMo14 or DIN 1.4110 according to Victorinox.[17] After a hardening process at 1040 °C and annealing at 160 °C the blades achieve an average blade steel hardness of 56 HRC. This steel hardness is suitable for practical use and easy resharpening, but less than achieved in stainless steel alloys used for blades optimized for high wear resistance. According to Victorinox the martensitic stainless steel alloy used for the parts is X39Cr13 or DIN 1.4031 and for the springs X20Cr13 or DIN 1.4021.[18][19]

The steel used for the wood saws, scissors and nail files has a steel hardness of HRC 53, the screwdrivers, tin openers and awls have a hardness of HRC 52, and the corkscrew and springs have a hardness of HRC 49.[18][citation needed]

The metal saws and files, in addition to the special case hardening, are also subjected to a hard chromium plating process so that iron and steel can also be filed and cut.[16][20]

Various sized and scaled models produced by Wenger

Although red Cellulose Acetate Butyrate (CAB) (generally known trade names are Cellidor, Tenite and Tenex) scaled Swiss Army Knives are most common, there are many colors and alternative materials like nylon and aluminium for the scales available.[21][22] Many textures, colors and shapes now appear in the Swiss Army Knife. Since 2006 the scales on some knife models can have texturized rubber non-slip inlays incorporated, intended for sufficient grip with moist or wet hands. A modding community has also developed, resulting in custom models produced with colorful anodized patterns or wood handles.[citation needed]


During assembly, all components are placed on several brass rivets. The first components are generally an aluminum separator and a flat steel spring. Once a layer of tools is installed, another separator and spring are placed for the next layer of tools. This process is repeated until all the desired tool layers and the finishing separator are installed. Once the knife is built, the metal parts are fastened by adding brass flanged bushings to the rivets. The excess length of the rivets is then cut off to make them flush with the bushings. Finally the remaining length of the rivets is flattened into the flanged bushings.

After the assembly of the metal parts, the blades are sharpened to a 15° angle, resulting in a 30° V-shaped steel cutting edge. The blades are then checked with a laser reflecting goniometer to verify the angle of the cutting edges. Finally the scales are pressed onto the flanged bushings. The scales are being held in place by holes incorporated in the insides of the scales that result in a tight shape connection with the flanged bushings.[23]


Wenger EvoGrip S17 85 mm knife.

Victorinox Swiss Army knives use 58 mm (2.3 in), 74 mm (2.9 in), 84 mm (3.3 in), 91 mm (3.6 in), 93 mm (3.7 in), 100 mm (3.9 in), 108 mm (4.3 in) and 111 mm (4.4 in) closed length steppings. The thickness of the knives varies depending on the number of tool layers included. The 91 mm (3.6 in) knives offer the most variety in tool configurations in the Victorinox model line.[24]

Wenger Swiss Army knives use 65 mm (2.6 in), 75 mm (3.0 in), 85 mm (3.3 in) 93 mm (3.7 in), 100 mm (3.9 in), 120 mm (4.7 in) and 130 mm (5.1 in) closed length steppings. Thickness varies depending on the number of tool layers included. The 85 mm (3.3 in) knives offer the most variety in tool configurations in the Wenger model line.[25]


The Swiss company Victorinox AG and up to 2008 its wholly owned subsidiary Wenger SA supply about 50,000 knives to the Military of Switzerland each year, and manufacture many more for export, mostly to the United States. Many commercial Victorinox and Wenger Swiss Army knives can be immediately distinguished by the "cross logos" depicted on their grip shells; the Victorinox cross is surrounded by a shield with bilateral symmetry, while the Wenger cross is surrounded by a slightly rounded square with quadrilateral symmetry. Since 1961 the military issue knives supplied to the Swiss Armed Forces bear the Swiss Coat of Arms.

Many other companies manufacture similar-looking multi-tool folding knives in a wide range of quality and prices. The cross-and-shield emblem and the words SWISS ARMY are registered trademarks of Victorinox AG and its related companies.[citation needed]

Knives issued by the Swiss military[]

Since the first issue as personal equipment in 1891 the Soldatenmesser (Soldier Knives) issued by the Swiss Armed Forces have been revised several times. There are five different main Modelle (models). Their model numbers refer to the year of introduction in the military supply chain. Several main models have been revised over time and therefore exist in different Ausführungen (executions), also denoted by the year of introduction. The issued models of the Swiss Armed Forces are:[26]

  • Modell 1890
    • Modell 1890 Ausführung 1901
  • Modell 1908
  • Modell 1951
    • Modell 1951 Ausführung 1954
    • Modell 1951 Ausführung 1957
  • Modell 1961
    • Modell 1961 Ausführung 1965
    • Modell 1961 Ausführung 1978
    • Modell 1961 Ausführung 1994
  • Soldatenmesser 08 (Soldier Knife 08)

Soldier Knives are issued to every recruit or member of the Swiss Armed Forces and the knives issued to officers have never differed from those issued to non-commissioned officers or privates.[27] A model incorporating a corkscrew and scissors was produced as an officer's tool, but was deemed not "essential for survival", leaving officers to purchase it individually.[2]

Soldier knife model 1890[]

The Soldier Knife model 1890 had a spear point blade, reamer, can-opener, screwdriver and grips made out of oak wood scales (handles) that were treated with rapeseed oil for greater toughness and water-repellency, which made them black in color. The wooden grips of the Modell 1890 tended to crack and chip so in 1901 these were changed to a hard reddish-brown fiber similar in appearance to wood. The knife was 100 mm (3.9 in) long, 20.5 mm (0.81 in) mm thick and weighed 144 g (5.1 oz).[28]

Soldier knife model 1908[]

Modell 1908, the knife that was issued from 1908 to 1951.[28]

The Soldier Knife model 1908 had a clip-point blade rather than the 1890s spear point blade, still with the fiber scales, carbon steel tools, nickle-silver bolster, liners, and divider. The knife was 100 mm (3.9 in) long, 16.5 mm (0.65 in) mm thick and weighed 125 g (4.4 oz). The contract with the Swiss Army split production equally between the Victorinox and Wenger companies.[28]

Soldier knife model 1951[]

The soldier Knife model 1951 had fiber scales, nickle-silver bolsters, liners, and divider, and a spear point blade. This was the first Swiss Armed Forces issue model where the tools were made of stainless steel. The screwdriver now had a scraper arc on one edge. The knife was 93 mm (3.7 in) long, 13.5 mm (0.53 in) mm thick and weighed 90 g (3.2 oz).

Soldier knife model 1961[]

Modell 1961, the knife that was issued from 1961 to 2008.

The Soldier Knife model 1961 has a 93 mm (3.7 in) long knurled alox handle with the Swiss crest, a drop point blade, a reamer, a blade combining bottle opener, screwdriver, and wire stripper, and a combined can-opener and small screwdriver and it weighs 72 g (2.5 oz). The knife was 12 mm (0.47 in) mm thick and weighed 72 g (2.5 oz)

This official Swiss military model also contains a brass spacer, which allows the knife, with the screwdriver and the reamer extended simultaneously, to be used to assemble the SIG 550 and SIG 510 assault rifles: the knife serves as a restraint to the firing pin during assembly of the lock. The Soldier Knife model 1961 was manufactured only by Victorinox and Wenger.

Soldier knife 08[]

Soldatenmesser 08, the knife currently issued to the Swiss Armed Forces.

The Soldier Knife 08 was first issued to the Swiss Armed Forces beginning with the first basic training sessions of 2009.[29]

The Soldier Knife 08 features an 111 mm (4.4 in) long ergonomic handle with polymer texturized non-slip inlays incorporated in the nylon grip shells and a double liner locking system, one-hand 86 mm (3.4 in) long locking partly serrated chisel ground drop point blade, wood saw, can opener with small 3 mm (0.12 in) screwdriver, locking bottle opener with large 7 mm (0.28 in) screwdriver and wire stripper/bender, reamer, Phillips (PH2) screwdriver and keyring. The Soldier Knife 08 width is 34.5 mm (1.36 in), thickness is 18 mm (0.71 in), overall length opened is 197 mm (7.8 in) and it weighs 131 g (4.6 oz). The Soldier Knife 08 is manufactured only by Victorinox.

Knives issued by other militaries[]

The armed forces of more than 20 different nations have issued their own versions of the Swiss army knife, among them the forces of Germany, France, the Netherlands and Malaysia.[30]

Cultural impact[]

The Swiss Army knife has been added to the collection of the New York Museum of Modern Art (MoMA) and Munich's State Museum of Applied Art for its design. The term "Swiss Army" currently is a registered trademark owned by Victorinox AG and its subsidiary Wenger SA.[31]

The television show MacGyver features Angus MacGyver who frequently uses a Swiss Army knife to solve problems and construct simple objects.

The term "Swiss Army knife" has entered popular culture as a metaphor for usefulness and adaptability.[32] The multi-purpose nature of the tool has also inspired a number of other gadgets.[33]

See also[]

  • Baselard
  • Ballpoint pen knife
  • Multi-tool
  • Gerber multitool
  • Leatherman

Notes and references[]

  1. "Victorinox Swiss Army Knives Info". Victorinox. Retrieved 2008-09-18. 
  2. 2.0 2.1 2.2 2.3 Foulkes, Imogen (2009-07-30). "From humble tool to global icon". BBC News. Retrieved 2011-10-31. 
  3. "Newtons Newton's Newton Swiss Switzerland Vaud French France Beaujolais Blace Gonnu 69460". Retrieved 2011-11-01. 
  4. SAKWiki Officer's and Sports Knife
  5. Dictionnaire Des Sciences Et Techniques Du Pétrole: Anglais-français. 1993. p. 427. ISBN 2710806487. 
  6. "Victorinox official company history". Retrieved 2007-12-10. 
  7. Victorinox joins forces and integrates Wenger knife business
  8. Victorinox wins contract for new army knife
  9. "Home". Victorinox AG. Retrieved 2011-10-27. 
  10. "Victorinox USB Product Page Master/Secure". Retrieved 2011-10-31. 
  11. "Giant Knife Wenger Swiss Army Knife". Retrieved 2011-11-01. 
  12. "Now That's a Knife: Swiss Army Knife Sets Record for Tools". Fox News. 2007-11-23.,2933,312483,00.html. 
  13. Dual Time Zone Watches. "The Giant Guinness World Record Holding Swiss Army Knife by Wenger at Swiss Knife Shop". Retrieved 2011-10-27. 
  14. "MultiTools — SwissChamp XAVT". Victorinox Swiss Army. Retrieved 2011-10-31. 
  15. SAKWiki. com Locking Systems
  16. 16.0 16.1 "Victorinox Swiss Army Knives Info Steelinfo". Retrieved 2011-10-31. 
  17. Product presentation of a knife at
  18. 18.0 18.1 e-mail scan regarding applied steel alloys by Robert Elsener from Victorinox
  19. "Stainless Steel: Tables of Technical Properties Second Edition 2007" (PDF). Euro Inox. 2007. Retrieved 2011-10-31. 
  20. "Swiss Army Knife FAQ's at the Secret Order of Swiss Army Knives website". Retrieved 2011-10-31. [dead link]
  21. US Patent 20130040125 A1 Expandable polymers of cellulose acetate butyrate
  22. "Cellídor resins".,3,5,0. Retrieved 2011-10-31. 
  23. [1][dead link]
  24. Victorinox Knife List
  25. Wenger Knife List
  26. "Schweizer Soldatenmesser 1890 - 2007 exhibition Schloss Thun — Schweiz (German)". Retrieved 2011-10-31. 
  27. McPhee, John (1983-10-31). "La Place de la Concorde Suisse-I". The New Yorker. pp. 50. Retrieved 22 July 2013. 
  28. 28.0 28.1 28.2 The Swiss Army Knife Owner's Manual, published 7 September 2011
  29. "Neues Soldatenmesser 08 an die Armee übergeben", March 10, 2009
  30. Subramanian, Samanth (February 16, 2010): The Swiss Army Knife returns to the battlefield. Retrieved July 27, 2012.
  31. "Legal - Victorinox Swiss Army". Retrieved 16 September 2012. 
  32. "Victorinox AG — Company History". Retrieved 2011-10-31. 
  33. "Swiss Army Knife Launches the Age of the Multitool". 2008-06-12. Archived from the original on 2013-02-09. Retrieved 2011-10-31. 

External links[]

This page uses Creative Commons Licensed content from Wikipedia (view authors).