- "Thickener" redirects here. For a separation method see gravity separation.
Thickening agents, or thickeners, is the term applied to substances which increase the viscosity of a solution or liquid/solid mixture without substantially modifying its other properties; although most frequently applied to foods where the target property is taste, the term also is applicable to paints, inks, explosives, etc. Thickeners may also improve the suspension of other ingredients or emulsions which increases the stability of the product. Thickening agents are often regulated as food additives and as cosmetics and personal hygiene product ingredients. Some thickening agents are gelling agents (gellants), forming a gel, dissolving in the liquid phase as a colloid mixture that forms a weakly cohesive internal structure. Others act as mechanical thixotropic additives with discrete particles adhering or interlocking to resist strain.
Thickening agents can also be used when medical condition such as Dysphagia cause individuals difficulty when swallowing. Thickened liquids play a vital role in reducing risk of aspiration for dysphagia patients.
Food thickeners frequently are based on either polysaccharides (starches, vegetable gums, and pectin), or proteins. A flavorless powdered starch used for this purpose is a fecula (from the Latin faecula, diminutive of faex meaning "dregs"). This category includes starches as arrowroot, cornstarch, katakuri starch, potato starch, sago, tapioca and their starch derivatives. Vegetable gums used as food thickeners include alginin, guar gum, locust bean gum, and xanthan gum. Proteins used as food thickeners include collagen, egg whites, furcellaran, and gelatin. Sugars include agar and carrageenan. Other thickening agents act on the proteins already present in a food. One example is sodium pyrophosphate, which acts on casein in milk during the preparation of instant pudding.
Different thickeners may be more or less suitable in a given application, due to differences in taste, clarity, and their responses to chemical and physical conditions. For example, for acidic foods, arrowroot is a better choice than cornstarch, which loses thickening potency in acidic mixtures. At (acidic) pH levels below 4.5, guar gum has sharply reduced aqueous solubility, thus also reducing its thickening capability. If the food is to be frozen, tapioca or arrowroot are preferable over cornstarch, which becomes spongy when frozen.
Many other food ingredients are used as thickeners, usually in the final stages of preparation of specific foods. These thickeners have a flavor and are not markedly stable, thus are not suitable for general use. However, they are very convenient and effective, and hence are widely used.
Functional flours are produced from specific cereal variety (wheat, maize, rice or other) conjugated to specific heat treatment able to increase stability, consistency and general functionalities. These functional flours are resistance to industrial stresses such as acidic pH, sterilisation, freeze conditions, and can help food industries to formulate with natural ingredients. For the final consumer, these ingredients are more accepted because they are shown as "flour" in the ingredient list.
Flour is often used for thickening gravies, gumbos, and stews. It must be cooked in thoroughly to avoid the taste of uncooked flour. Roux, a mixture of flour and fat (usually butter) cooked into a paste, is used for gravies, sauces and stews. Cereal grains (oatmeal, couscous, farina, etc.) are used to thicken soups. Yogurt is popular in Eastern Europe and Middle East for thickening soups. Soups can also be thickened by adding grated starchy vegetables before cooking, though these will add their own flavour. Tomato puree also adds thickness as well as flavour. Egg yolks are a traditional sauce thickener in professional cooking; they have rich flavor and offer a velvety smooth texture but achieve the desired thickening effect only in a narrow temperature range. Overheating easily ruins such a sauce, which can make egg yolk difficult to use as a thickener for amateur cooks. Other thickeners used by cooks are nuts (including rehan) or glaces made of meat or fish.
Many thickening agents require extra care in cooking. Some starches lose their thickening quality when cooked for too long or at too high a temperature; on the other hand, cooking starches too short or not hot enough might lead to an unpleasant starchy taste or cause water to seep out of the finished product after cooling. Also, higher viscosity causes foods to burn more easily during cooking. As an alternative to adding more thickener, recipes may call for reduction of the food's water content by lengthy simmering. When cooking, it is generally better to add thickener cautiously; if over-thickened, more water may be added but loss of flavour and texture may result.
Gelling agents are food additives used to thicken and stabilize various foods, like jellies, desserts and candies. The agents provide the foods with texture through formation of a gel. Some stabilizers and thickening agents are gelling agents.
- Alginic acid (E400), sodium alginate (E401), potassium alginate (E402), ammonium alginate (E403), calcium alginate (E404) - polysaccharides from brown algae
- Agar (E406, a polysaccharide obtained from red algaes)
- Carrageenan (E407, a polysaccharide obtained from red seaweeds)
- Locust bean gum (E410, a natural gum polysaccharide from the seeds of the Carob tree)
- Pectin (E440, a polysaccharide obtained from apple or citrus-fruit)
- Gelatin (E441, made by partial hydrolysis of animal collagen)
Commercial jellies used in East Asian cuisines include the glucomannan polysaccharide gum used to make "lychee cups" from the konjac plant, and aiyu or ice jelly from the Ficus pumila climbing fig plant.
Food thickening can be important for people facing medical issues with chewing or swallowing, as foods with a thicker consistency can reduce the chances of choking, or of inhalation of liquids or food particles, which can lead to aspiration pneumonia.
Mechanical and thixotropic agentsEdit
Fumed silica and similar products form stiff microscopic chains or fibers which interlock or agglomerate into a mass, holding the associated liquid by surface tension, but which can separate or slide when sufficient force is applied. This causes the thixotropic or shear-thinning property (also frequently exhibited by gels), where the viscosity is non-newtonian and becomes lower as the shearing force or time increases; their usefulness is primarily that the resulting increase in viscosity is large compared to the quantity of silica added. Fumed silica is generally accepted as safe as a food additive and is frequently used in cosmetics. Additives such as precipitated silica, fine talc, or chalk also meet the definition of thickening agent in that they increase viscosity and body while not affecting the target property of a mixture.
Thickening agents used in cosmetics or personal hygiene products include viscous liquids such as polyethylene glycol, synthetic polymers such as carbomer (a trade name for polyacrylic acid) and vegetable gums. Some thickening agents may also function as stabilizers when they are used to maintain the stability of an emulsion. Some emollients, such as petroleum jelly and various waxes may also function as thickening agents in an emulsion.
Paint and printing thickenersEdit
One of the main use of thickeners is in the paint and printing industries, which depend heavily on rheology modifiers, without which paints would be oil based, with shellac added to help the surface not crack on drying, but without thickeners, pigments would settle to the bottom of the can, and inconsistent results would be common. Water based formulas would be nearly impossible with the exception of India ink and the few other water soluble pigments, but these would have very little coverage and at best would stain wood slightly. All modern paints and inks will have some "pigment" added at the factory for opacity and to control the specularity of the finish, from matte to high gloss, dependent on thickener used, but more so on the size of the particles added as opacity modifier. One micron particle sizes and below will be the limit of high gloss, probably confined to luxury automotive coatings, and about 100 micron particulates will make a bumpy surface on the microscopic scale, which scatters light and makes the surface appear matte. There are dozens or hundreds of other performance additives used in paints and inks, for example wetting surfactants, binders, flocculants, dispersants, leveling compounds, antifoam, aerators, surface tension modifiers, film formers, plasticizers, pore formers, water repellents, corrosion inhibitors, bittering agents to deter rodents ...
Rheology modifiers in common use:
- Polyurethanes, acrylic polymers, latex, styrene/butadiene,
- PVA - polyvinylalcohol, not polyvinylacetate which is used in adhesives such as wood glue. PVA monomers are dispersed in the paint or ink liquid at an early stage in the mix, as it does not affect rheology unless the pH is low. Boric acid is usually used to initiate polymerization after the pigment is added (the pigment "grind" stage) and dispersed, the mixture is thickened while stirring to maintain homogeneous consistency. Often this stage is problematic since air is entrained by all but the lowest shear impellers, which are inadequate for this purpose, instead antifoam additives are used to control air bubbles, which continue to be a benefit during paint application. Air entrainment during mixing is not unique to PVA—in fact hardly a formula for paint exists that doesn't at least require some care in mixing.
- Clays - attapulgite which also disperses suspensions, bentonite (both flocculating and non-flocculating), and other montmorillonite clays. Usually clays, when dry, exist as a very fine powder, facilitating dispersion and compatibility with other ingredients. Clays generally make matte surfaces, in spite of their fine particulate nature. Not only paints and inks, but other industries such as pharmaceutical, construction, and cosmetics, especially hair styling aids and facial detoxifying masks increasingly favor bentonite and attapulgite clays over other rheology modifiers, dispersion aids, opacifying fillers, antifoam, and numerous niche uses which exploit the numerous inherent qualities which have drawn artisans to this amazing material . Clays are sustainably sourced and do not involve any egregious environmental damage, which were among the cheapest bulk materials until recently, when the pricing went up steadily, following the upsurge in its use pattern.
- Cellulosics - CMC, HMC, HPMC, and others, all are chemically substituted cellulose macromolecules. The hydroxyl groups are what gets substituted by other functional groups, such as methoxy or propyl. The amount of substitution and molecular weight determine viscosity of the solution, assuming concentration stays the same; adding more also increases viscosity.
- Sulfonates - Sodium or calcium salts, good water retention, versatile, and highly efficient.
- Gums - Guar, xanthan, cellulose, Locust bean, and acacia are the main ones.
- Saccarides - Carrageenan, pullulan, konjac, and alginate, sometimes called hydrocolloids, these thickeners are extremely versatile and specific in function—each has a series of grades or types which behave differently, for example kappa carrageenan will form strong gels(potassium activated) but iota carrageenan will not form gels and only thickens.
- Proteins - Cassein, collagen, and sometimes albumin.
- Modified Castor Oil - much like cellulose, castor oil has hydroxyl groups, unlike other oils which at most have double bonds, which castor oil also has, but most substitutions occur at the hydroxyl moieties, allowing exotic derivatives with myriad properties. The most recent advances in rheology modifiers have been in this category. The BASF corporation has a new line based on castor oil derivatives, for example.
- Organosilicones - Silicone resins, dimethicones, and modified silicones simplify formulation somewhat, a borrowing from cosmetics.
All of the above rheology modifiers are used in the 0.2% to 2.0% range
In petrochemistry, gelling agents, also called solidifiers, are chemicals capable of reacting with oil spills and forming rubber-like solids. The gelled coagulated oil then can be removed from the water surface by skimming, suction devices, or nets. Calm or only moderately rough sea is required.
Explosives and incendiariesEdit
Many fuels used in incendiary devices require thickening for increased performance. Aluminium salts of fatty acids are frequently used. Some formulations (e.g. Napalm-B) use polymeric thickeners, namely polystyrene. Hydroxyl aluminium bis(2-ethylhexanoate) is also used. Thickened pyrophoric agent, a pyrophoric replacement of napalm, is a triethylaluminium thickened with polyisobutylene.
- ↑ Devon L. Glassburn, MS and Jodelle F. Deem, PhD "Thickener Viscosity in Dysphagia Management: Variability among Speech-Language Pathologists" Division of Communication Disorders, University of Kentucky, Lexington, Kentucky, USA, P1
- ↑ Jadhav, S. R., Vemula, P. K., Kumar, R., Raghavan, S. R. and John, G. (2010), Sugar-Derived Phase-Selective Molecular Gelators as Model Solidifiers for Oil Spills. Angew. Chem., 122: 7861–7864. doi: 10.1002/ange.201002095
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|