|Type 3 Chi-Nu|
A Type 3 Chi-Nu at the JGSDF Ordnance School in Tsuchiura, Japan
|Place of origin||Empire of Japan|
|Weight||19 t (21 tons)|
|Length||5.64 m (18 ft 6 in)|
|Width||2.41 m (7 ft 11 in)|
|Height||2.68 m (8 ft 10 in)|
|Type 3 75 mm Tank Gun|
|1 x 7.7 mm Type 97 machine gun|
|Engine||Mitsubishi Type 100 |
21.7 L V-12 diesel
240 hp (179 kW) at 2,000 rpm
|210 km (130 mi)|
|Speed||39 km/h (24 mph)|
Type 3 Medium Tank Chi-Nu (三式中戦車 チヌ San-shiki chusensha Chi-nu ) was a medium tank of Imperial Japanese Army in World War II. It was an improved version of the Type 97 Chi-Ha line by giving it a Type 3 75 mm Tank Gun, one of the largest guns used on Japanese tanks during the war.
The Chi-Nu did not see combat during the war; they were retained for defence of the Japanese Home Islands in case of an Allied invasion.
History and development[edit | edit source]
Type 3 medium tank Chi-Nu was developed to cope with the American M4 Sherman  after it was clear that the Type 1 Chi-He design was still inadequate. The Army Technical Bureau had been working on the Type 4 Chi-To medium tank as the counter to the M4 Sherman, but there were problems and delays in the program, and as a result a stopgap tank was required. Development on the Type 3 Chi-Nu started in May 1943 and was finished by October, just six months later. The low priority given to tank production by 1943 meant that the Type 3 did not actually enter production until 1944, by which time raw materials were in very short supply, and much of Japan's industrial infrastructure had been destroyed by American strategic bombing.
A total of 144 units were produced (55 units in 1944, 89 units in 1945). The Type 3 Chi-Nu was the last tank that was fielded by the Imperial Japanese armed forces, and was still being produced at the end of the war.
Design[edit | edit source]
The main armament of the Type 3 Chi-Nu was the 75 mm caliber Type 3 Tank Gun. The gun could be elevated between -10 and +25 degrees. Firing a shell at a muzzle velocity of 680 metres per second (2,200 ft/s) it gave an armor penetration of 90 mm (3.5 in) at 100 m (110 yd) and 65 mm (2.6 in) at 1,000 m (1,100 yd).
Service record[edit | edit source]
The Type 3 was allocated to the Japanese home islands to defend against the projected Allied Invasion. At least 6 tank regiments were equipped with Type 3 Chi-Nu tanks on Kyūshū and Honshū, including the 1st Tank Division and 4th Tank Division based around Tokyo. As the surrender of Japan occurred before that invasion, the Type 3 was never used in combat.
Variants[edit | edit source]
- Type 3 Chi-Nu Kai prototype
Notes[edit | edit source]
References[edit | edit source]
- Foss, Christopher (2003). Great Book of Tanks: The World's Most Important Tanks from World War I to the Present Day. Zenith Press. ISBN 0-7603-1475-6.
- Foss, Christopher (2003). Tanks: The 500. Crestline. ISBN 0-7603-1500-0.
- Tomczyk, Andrzej (2005). Japanese Armor Vol. 4. AJ Press. ISBN 83-7237-167-9.
- Zaloga, Steven J. (2007). Japanese Tanks 1939–45. Osprey. ISBN 978-1-8460-3091-8.
[edit | edit source]
|Wikimedia Commons has media related to Type 3 Chi-Nu tank.|
- World War II vehicles
- Taki's Imperial Japanese Army Page
- History of War
- World War II Drawings
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|