Military Wiki
Register
Advertisement
Ural Bucket

A bucket of one of the first Uralmash dragline excavators with a Pobeda car parked on it, 1952

Uralmash is a heavy machine production facility of the Russian engineering corporation OMZ. The facility is located in Yekaterinburg, Russia. The surrounding residential area where workers live is also called Uralmash.

Uralmash (Russian: Уралмаш) is an abbreviation of Уральский Машиностроительный Завод, Ural’s’kiy Mashinostroitelnyy Zavod, literally ‘Urals Machine-Building Plant’. Historically, the plant was also called Уральский Завод Тяжелого Машиностроения, Ural’s’kiy Zavod Tyazhelogo Mashinostroyeniya, ‘Ural Heavy Machinery Plant’ or УЗТМ, UZTM, and for a time carried the honorary name of Ordzhonikidze Ural Heavy Machinery Plant, after Grigoriy Ordzhonikidze.

History[]

The Ural Heavy Machine Building Plant began operations in 1933 in compliance with the plans of the Government of the USSR for the industrialization of the country. During the pre-World War II period, Uralmash manufactured its products (blast furnace equipment, sintering machines, rolling mills, presses, cranes, etc.) for the mining and metallurgical industries located in the Urals and Siberia. The majority of these products were produced from individual designs. At the same time the plant began to develop military equipment, with the production of F.F. Petrov designed Howitzer M-30.

During World War II large-scale production of armoured materiel was organized at the plant. At first the plant manufactured armoured tank hulls, later expanding to production of T-34 tanks and the SU-122, SU-85, and SU-100 gun tank destroyers based on the T-34 tank design. The self-propelled gun mounts built at Uralmash demonstrated their effectiveness on the battlefield as a successful combination of maneuverability of T-34 tanks and huge firepower of ordnance pieces.

After World War II, the state made large investments in the reconstruction and expansion of the Uralmash plant. This modernisation favoured both increased output and the production of new machines and equipment—shovels, drilling rigs, crushers and mills.

In the 1950s the state began efforts to equip the aviation and rocket industries with heavy hydraulic presses. Uralmash, in response to this new demand, created a range of this type of equipment.

Dragline excavator in the Baltic Oil Shale Basin

Uralmash-manufactured dragline excavator in the Narva oil shale open pit mine in Estonia.

In 1949 the plant produced the first dragline excavator. In 1960s the plant designed and manufactured draglines with booms 90–100 m long. Now more than 200 walking draglines are in operation at mines in Siberia and the Far East. One third of the total coal amount produced by the open casting is mined with the help of draglines.

The drilling rigs manufactured by Uralmash were of prime importance in the development of oil and gas regions of the USSR, including West Siberia with its severe climate. The extra deep drilling rigs designed and manufactured at the plant made it possible to reach the depth of 13 km (at the Kola Superdeep Borehole) and to obtain for the first time rock samples approximately 3 billion years old. In addition to land-based rigs, Uralmash also designs off-shore drilling equipment. For at least part of the late 1980s and early 1990s, the plant was controlled, at least in part, by the Uralmash gang, a racketeering organization.

In accordance with Russian Federation law, Uralmash was transformed in December 1992 into an open-end joint stock company under the name "The Ural Heavy Machine Building Plant". In 1996 Uralmash it became part of OMZ, one of Russia's largest engineering corporations, founded and initially led by Kakha Bendookidze.

In February 2007 OMZ and Metalloinvest agreed to create a common manufacturing complex. OMZ contributed its holdings in Uralmash to the joint venture while Metalloinvest contributed its holdings in ORMETO-YuUMZ. The consolidation will result in the creation of a large machine-building conglomerate with a leading position in the CIS metallurgical equipment market with a joint market share in the metallurgical equipment segment in Russia exceeding 40%.

The first director of Uralmash was A. P. Bannikov. The current director is Oleg Danchenko.

External links[]

All or a portion of this article consists of text from Wikipedia, and is therefore Creative Commons Licensed under GFDL.
The original article can be found at Uralmash and the edit history here.
Advertisement