287,293 Pages

Whitehead Mark 1 torpedo
Whitehead torpedo General Profile, The Whitehead Torpedo U.S.N.1898.jpg
Whitehead torpedo mechanism, published 1891
Type Anti-surface ship torpedo[1]
Place of origin  Austria-Hungary
Service history
In service 1894–1913[1]
Used by  United States Navy[2]
Production history
Designer Robert Whitehead
Designed 1892[1]
Manufacturer Torpedofabrik Whitehead & Co.[3]
E. W. Bliss Company
Number built 100[4]
Variants Whitehead Mk 1B[5]
Specifications
Weight 845 pounds[6]
Length 140 inches (3.55 meters)[6]
Diameter 17.7 inches (45 centimeters)[6]

Effective range 800 yards[1]
Warhead wet guncotton[6]
Warhead weight 118.5 lbs[6]
Detonation
mechanism
War Nose Mk 1 contact exploder[1]

Engine 3-cylinder reciprocating
Speed 26.5 knots[1]
Guidance
system
depth control[1]
Launch
platform
battleships and torpedo boats[1]

The Whitehead Mark 1 torpedo was the first Whitehead torpedo adopted by the United States Navy for use in an anti-surface ship role after the E. W. Bliss Company of Brooklyn, New York secured manufacturing rights in 1892. The US Navy made an initial acquisition of 100 Mark 1s, which, by the time they entered American service, were faster, had longer range and carried a larger warhead than Robert Whitehead's earlier models.[2]

Characteristics[edit | edit source]

The Mark 1 was ordinarily assembled into three sections: the warhead, the air flask and the after-body. The warhead's charge of dry guncotton weighed 98 3/4 pounds plus 20% water. The Mark 1 was what was known as a "cold-running" torpedo.[1] The three-cylinder reciprocating engine ran on cold, compressed air which was stored in the air flask, which had a capacity of 7.154 cubic feet at 1350 pounds per square inch. The after-body carried the engine and the tail, which contained the propellers.[6]

The Mark 1 guidance component included the Pendulum-and-hydrostat control device which was called the "Whitehead Secret". This version of the Whitehead torpedo lacked the gyroscope gear designed by Ludwig Obry, which was incorporated in a later Whitehead model, the Mark 3.

The Mark 1 was launched from battleships and torpedo boats.

References[edit | edit source]

This page uses Creative Commons Licensed content from Wikipedia (view authors).
Community content is available under CC-BY-SA unless otherwise noted.